County Permit SearchU.S. compliance directory
UtahGarfield County

Administrative overview · FIPS 49017

Garfield County permit authority

The first compliance decision is jurisdictional: identify the office with statutory authority over your parcel, then use its filing and inspection sequence to keep the project moving.

Jurisdictional status

County

This county profile is the primary starting point for unincorporated-area permitting.

Responsible agency

Garfield County Building Department

For a project in or near Garfield County, this office is the identified point of contact for permit intake, statutory code enforcement, plan review coordination, and inspection release conditions. Confirm the parcel’s boundary and project type before relying on the county lane.

Direct contact

Building Official: 435-676-1111; Building Department secretary: 435-676-1165; fax: 435-676-8239; county main line: 435-676-1100; alternate third-party inspector (Iron County): 435-865-5350

Call before mobilizing if the project has a boundary, occupancy, fire, septic, or utility question.

Permit counter

Garfield County Building Department, Garfield County Courthouse, 55 South Main Street, Panguitch, UT 84759; mailing address: P.O. Box 77, Panguitch, UT 84759

Operating hours

Monday-Friday 8:00 a.m.-12:00 p.m. and 1:00 p.m.-5:00 p.m.; closed holidays

Review expectation

N/A for plan review; the county publishes no standard approval duration. Inspection requests require at least two working days' notice. No building-permit fees are refunded after 180 days, and if no mandatory inspection has occurred within one year, the permit holder must renew the permit under the fee schedule.

Compliance workbench

Choose the next project decision.

Source trail

Official sources for this profile

Use these direct agency or licensing links to confirm current instructions before you file, pay, or schedule work. External pages control if their information differs from this directory.

Project questions

Frequently asked questions for Garfield County

Who handles permitting for this jurisdiction?

Garfield County Building Department is the identified county-level authority for this profile. Confirm that the property is in its service area before filing.

How should I begin an application?

Begin with the online permit gateway listed in the application guide. If the portal does not recognize the address or project type, contact Building Official: 435-676-1111; Building Department secretary: 435-676-1165; fax: 435-676-8239; county main line: 435-676-1100; alternate third-party inspector (Iron County): 435-865-5350.

How long might review take?

N/A for plan review; the county publishes no standard approval duration. Inspection requests require at least two working days' notice. No building-permit fees are refunded after 180 days, and if no mandatory inspection has occurred within one year, the permit holder must renew the permit under the fee schedule.

How are inspections scheduled?

Schedule through the City Inspect portal or contact the Garfield County Building Department by phone or in writing no fewer than two working days before the proposed inspection. Work must remain accessible and exposed until approved. Published stages are footing, foundation walls, four-way rough framing/electrical/plumbing/mechanical and energy-code items, insulation and shower pan, gypsum board before finishing, final before occupancy, and any additional compliance inspection the department requires. The county will not perform a final inspection on an occupied building or issue a final approval or certificate of occupancy while code violations remain uncorrected. Reinspection fees must be paid before the next request. Iron County is listed as the SB 185 alternate third-party inspector at 435-865-5350.

Which codes and exemptions should I review?

Garfield County directs applicants to the Utah State Construction Code and applicable statewide amendments. Effective July 1, 2026, that code comprises the 2024 International Building Code, 2021 International Residential Code and Appendix AQ, 2024 International Plumbing Code, 2024 International Mechanical Code, 2024 International Fuel Gas Code, 2023 National Electrical Code, 2024 International Energy Conservation Code, 2024 International Existing Building Code, residential provisions of the 2024 International Swimming Pool and Spa Code, and applicable Utah amendments; the 2024 International Fire Code is the current State Fire Code. Projects use the codes in effect when a complete plan submission is accepted for review. The county issues residential and commercial permits and performs building, plumbing, electrical, and mechanical inspections; applicants within incorporated city limits must first provide city approval. The county's published shed policy exempts a one-story detached tool/storage shed, playhouse, or similar accessory structure under 200 square feet only when it has no power, water, or heat. A shed of 200 square feet or more, or any shed with power, water, or heat, requires a permit. The exemption does not authorize code- or ordinance-violating work, and the county will not permit utilities to be extended to an existing shed that was constructed without a permit. The county does not publish a complete local cosmetic-work exemption list on its current Building Department page, so other exemptions are N/A and should be confirmed with the Building Official.

Before contacting the permit counter

Have the project facts ready.

A productive call starts with a clear description of the property and proposed work. Keep the site address, parcel or assessor number, project valuation, existing occupancy, approximate square footage, structural scope, contractor information, and desired start date in front of you. Those facts help the Authority Having Jurisdiction route the question to building, planning, fire, environmental health, or another reviewing discipline.

Questions worth asking

  • • Is the parcel inside an incorporated city or county service area?
  • • Does this scope require building, trade, zoning, fire, or site permits?
  • • What plans and supporting documents make the submittal complete?
  • • How much lead time is needed for each inspection?