County Permit SearchU.S. compliance directory
West VirginiaBrooke County

Administrative overview · FIPS 54009

Brooke County permit authority

The first compliance decision is jurisdictional: identify the office with statutory authority over your parcel, then use its filing and inspection sequence to keep the project moving.

Jurisdictional status

Municipal Fallback

This profile identifies a handoff outside the county’s ordinary structural permitting lane.

Required jurisdiction check

Confirm the controlling local or state authority before filing.

The record is marked Municipal Fallback. That means the county profile should be treated as a routing brief: incorporated municipalities, a state building department, or a state fire marshal may control plan review, permits, and inspections. Contact the named agency below and verify the parcel’s jurisdiction before paying a fee or scheduling field work.

Responsible agency

City of Wellsburg City Inspector

For a project in or near Brooke County, this office is the identified point of contact for permit intake, statutory code enforcement, plan review coordination, and inspection release conditions. Confirm the parcel’s boundary and project type before relying on the county lane.

Direct contact

304-737-2104

Call before mobilizing if the project has a boundary, occupancy, fire, septic, or utility question.

Permit counter

Wellsburg City Hall, 70 Town Square, Wellsburg, WV 26070

Operating hours

Monday-Friday, 8:00 a.m.-4:00 p.m.; Saturday-Sunday closed.

Review expectation

A general building-permit application must be filed at least three days before construction begins, but the city publishes no guaranteed approval time. A separate floodplain permit application must be reviewed within 90 days after submission.

Compliance workbench

Choose the next project decision.

Source trail

Official sources for this profile

Use these direct agency or licensing links to confirm current instructions before you file, pay, or schedule work. External pages control if their information differs from this directory.

Project questions

Frequently asked questions for Brooke County

Who handles permitting for this jurisdiction?

This record is marked Municipal Fallback. Confirm whether a city, state agency, or other local authority controls the parcel before filing.

How should I begin an application?

No verified online portal was located in the reviewed public materials. Contact 304-737-2104 and request the current application route before preparing a final submittal.

How long might review take?

A general building-permit application must be filed at least three days before construction begins, but the city publishes no guaranteed approval time. A separate floodplain permit application must be reviewed within 90 days after submission.

How are inspections scheduled?

Contact the Wellsburg City Inspector at 304-737-2104. The Building Inspector or representative may conduct inspections at reasonable times in connection with permit issuance, renewal, revocation, or a use-and-occupancy certificate. The permit holder must provide lawful access; absent consent, the inspector must obtain a search warrant except in an emergency. The city does not publish an online inspection-request process, cutoff, or promised appointment window.

Which codes and exemptions should I review?

Brooke County's official FAQ states that the county has no building code or zoning and directs projects inside incorporated areas to the applicable city hall. The City of Wellsburg enforces its municipal Building and Housing Code, zoning ordinance, flood-damage-prevention ordinance, and applicable West Virginia State Building Code and State Fire Code requirements. The current West Virginia State Building Code is based on the 2018 IBC, 2018 IRC, 2018 IPC, 2018 IMC, 2018 IFGC, 2018 IPMC, 2018 IEBC, 2018 ISPSC, 2015 IECC, 2020 NEC, and related state amendments; applicants should confirm the precise scope applied by the City Inspector. For owner-occupied residential dwellings, Wellsburg defines ordinary repairs that do not require a building permit: wallpapering; qualifying interior finishes and plaster repair; replacement window or door glass; nonstructural-member, trim, molding, flooring, carpet, screen, and non-roof-supporting porch or stoop repairs; qualifying roll or batt insulation; faucet/valve working-part repairs, stoppage clearing, and leak repairs that do not rearrange piping; like receptacle, switch, or light-fixture replacement at 20 amps or less and below 150 volts to ground; repairs to installed electrically operated equipment; like detector/sprinkler-head and alarm-component repairs in one- or two-family dwellings; and like-capacity HVAC motors, pumps, fans, piping, ductwork, packaged equipment, and controls. Owner-performed painting is ordinary repair; contractor-performed painting requires a no-fee permit. Council may approve fee-only exemptions for qualifying privately supported cultural, historical, artistic, or scientific projects.

Before contacting the permit counter

Have the project facts ready.

A productive call starts with a clear description of the property and proposed work. Keep the site address, parcel or assessor number, project valuation, existing occupancy, approximate square footage, structural scope, contractor information, and desired start date in front of you. Those facts help the Authority Having Jurisdiction route the question to building, planning, fire, environmental health, or another reviewing discipline.

Questions worth asking

  • • Is the parcel inside an incorporated city or county service area?
  • • Does this scope require building, trade, zoning, fire, or site permits?
  • • What plans and supporting documents make the submittal complete?
  • • How much lead time is needed for each inspection?