County Permit SearchU.S. compliance directory
WisconsinBurnett County

Administrative overview · FIPS 55013

Burnett County permit authority

The first compliance decision is jurisdictional: identify the office with statutory authority over your parcel, then use its filing and inspection sequence to keep the project moving.

Jurisdictional status

County

This county profile is the primary starting point for unincorporated-area permitting.

Responsible agency

Burnett County Land Services Department, Zoning Division

For a project in or near Burnett County, this office is the identified point of contact for permit intake, statutory code enforcement, plan review coordination, and inspection release conditions. Confirm the parcel’s boundary and project type before relying on the county lane.

Direct contact

715-349-2109; UDC inspectors: Atlas Inspections 715-648-5444 or 715-554-2305, REM Inspecting LLC 715-598-4484

Call before mobilizing if the project has a boundary, occupancy, fire, septic, or utility question.

Permit counter

Burnett County Land Services/Zoning, Burnett County Government Center, Suite 120, 7410 County Road K, Siren, WI 54872

Operating hours

Monday-Friday, 8:30 a.m.-4:30 p.m.

Review expectation

Ask the agency for its current review estimate

Compliance workbench

Choose the next project decision.

Source trail

Official sources for this profile

Use these direct agency or licensing links to confirm current instructions before you file, pay, or schedule work. External pages control if their information differs from this directory.

Project questions

Frequently asked questions for Burnett County

Who handles permitting for this jurisdiction?

Burnett County Land Services Department, Zoning Division is the identified county-level authority for this profile. Confirm that the property is in its service area before filing.

How should I begin an application?

Begin with the online permit gateway listed in the application guide. If the portal does not recognize the address or project type, contact 715-349-2109; UDC inspectors: Atlas Inspections 715-648-5444 or 715-554-2305, REM Inspecting LLC 715-598-4484.

How long might review take?

A typical review timeline was not verified. Ask the agency for its current completeness and review estimate.

How are inspections scheduled?

Submit the land-use application, required dimensioned plot plan, and construction plans for habitable structures to Land Services. County staff performs a site visit and regularly inspects permitted work; call 715-349-2109 to arrange land-use or POWTS inspections. Before any dwelling, bunkhouse, or qualifying addition, contact the township's inspector: Atlas Inspections at 715-648-5444 or 715-554-2305 for Daniels, Dewey, Lincoln, Meenon, Oakland, Roosevelt, Rusk, Scott, Siren, Trade Lake, Sand Lake, and Wood River; REM Inspecting at 715-598-4484 for Anderson, Blaine, Grantsburg, Jackson, La Follette, Swiss, Union, Webb Lake, and West Marshland.

Which codes and exemptions should I review?

Burnett County Chapter 30 Land Use Ordinance, shoreland protection and wetland requirements, Chapter 22 floodplain provisions, sanitary/POWTS requirements, subdivision rules, and current county text amendments including 2026 amendments published by the Zoning Division. The county issues land-use and sanitary permits and inspects permitted land-use work and sewer installations. New dwellings, bunkhouses, and certain additions also require a separate Wisconsin Uniform Dwelling Code permit under SPS 320-325 from the township's designated Atlas Inspections or REM Inspecting inspector; commercial building-code approval remains under the applicable municipality or Wisconsin DSPS. A county land-use permit is not required for a 100-percent agricultural farm building or farm structure in an agricultural district if it is not intended for human habitation and meets all dimensional, setback, floodplain, and other requirements. Dog houses, tool sheds, playhouses, and similar accessory buildings no larger than 100 square feet are also exempt if every federal, state, county, setback, and dimensional rule is met. These exceptions do not waive sanitary, shoreland, floodplain, wetland, driveway, state UDC, trade, or municipal approvals.

Before contacting the permit counter

Have the project facts ready.

A productive call starts with a clear description of the property and proposed work. Keep the site address, parcel or assessor number, project valuation, existing occupancy, approximate square footage, structural scope, contractor information, and desired start date in front of you. Those facts help the Authority Having Jurisdiction route the question to building, planning, fire, environmental health, or another reviewing discipline.

Questions worth asking

  • • Is the parcel inside an incorporated city or county service area?
  • • Does this scope require building, trade, zoning, fire, or site permits?
  • • What plans and supporting documents make the submittal complete?
  • • How much lead time is needed for each inspection?