Administrative overview · FIPS 21023
Bracken County permit authority
The first compliance decision is jurisdictional: identify the office with statutory authority over your parcel, then use its filing and inspection sequence to keep the project moving.
Jurisdictional status
State Fallback
This profile identifies a handoff outside the county’s ordinary structural permitting lane.
Required jurisdiction check
Confirm the controlling local or state authority before filing.
The record is marked State Fallback. That means the county profile should be treated as a routing brief: incorporated municipalities, a state building department, or a state fire marshal may control plan review, permits, and inspections. Contact the named agency below and verify the parcel’s jurisdiction before paying a fee or scheduling field work.
Responsible agency
Kentucky Department of Housing, Buildings and Construction (Bracken County state building inspection contact)
For a project in or near Bracken County, this office is the identified point of contact for permit intake, statutory code enforcement, plan review coordination, and inspection release conditions. Confirm the parcel’s boundary and project type before relying on the county lane.
Direct contact
502-591-9896
Call before mobilizing if the project has a boundary, occupancy, fire, septic, or utility question.
Permit counter
Bracken County Local Government, 116 West Miami Street, P.O. Box 264, Brooksville, KY 41004; state building-inspection contact: Keith Ransdell, Kentucky DHBC
Operating hours
N/A. County office hours were not published on the verified pages; Kentucky DHBC general office hours are Monday-Friday, 8:00 a.m.-4:30 p.m.
Review expectation
N/A. No published state or county building-plan review timeline was found.
Compliance workbench
Choose the next project decision.
Apply online
Open the verified digital gateway, application form, and review timeline.
Open guide →Fees & penalties
Understand fee schedules, enforcement exposure, and stop-work liabilities.
Open guide →Codes & exemptions
Read the code framework, minor-work exemptions, and inspection lane.
Open guide →Agency website
Visit the primary public source for current notices and contact changes.
Open guide →Source trail
Official sources for this profile
Use these direct agency or licensing links to confirm current instructions before you file, pay, or schedule work. External pages control if their information differs from this directory.
Project questions
Frequently asked questions for Bracken County
Who handles permitting for this jurisdiction?
This record is marked State Fallback. Confirm whether a city, state agency, or other local authority controls the parcel before filing.
How should I begin an application?
Begin with the online permit gateway listed in the application guide. If the portal does not recognize the address or project type, contact 502-591-9896.
How long might review take?
N/A. No published state or county building-plan review timeline was found.
How are inspections scheduled?
For commercial building permits contact state inspector Keith Ransdell at 502-591-9896 or keith.ransdell@ky.gov. State manufactured-housing inspector Bruce Hall is 502-682-8544. Electrical matters go through the county judge executive or the city office where work occurs; state electrical inspector Darryl Morgan is 859-473-5176. HVAC inspector David Pike is 859-435-8595. Plumbing inspector Bobby Saylor is available Wednesday 8:00-9:00 a.m. at Bracken County Health Department, 429 Frankfort Street, Brooksville, KY 41004, 859-298-8721.
Which codes and exemptions should I review?
The official Kentucky DHBC inspector sheet identifies no local Bracken County building inspector and directs commercial construction permit work to the Department of Housing, Buildings and Construction. The statewide framework is the 2018 Kentucky Building Code and 2018 Kentucky Residential Code, based on the 2015 IBC/IRC with Kentucky amendments. No newer 2026 code adoption was verified. No Bracken County-specific minor or cosmetic exemption list was published. Applicable Kentucky code exemptions generally cover qualifying small detached sheds/playhouses, fences up to 7 feet, retaining walls up to 4 feet, sidewalks/driveways, ordinary finish work, qualifying decks/awnings, and minor electrical, mechanical, gas, or plumbing work; verify with the state inspector before relying on an exemption.