County Permit SearchU.S. compliance directory
IdahoGooding County

Administrative overview · FIPS 16047

Gooding County permit authority

The first compliance decision is jurisdictional: identify the office with statutory authority over your parcel, then use its filing and inspection sequence to keep the project moving.

Jurisdictional status

County

This county profile is the primary starting point for unincorporated-area permitting.

Responsible agency

Gooding County Planning, Zoning and Building Department

For a project in or near Gooding County, this office is the identified point of contact for permit intake, statutory code enforcement, plan review coordination, and inspection release conditions. Confirm the parcel’s boundary and project type before relying on the county lane.

Direct contact

208-934-5958; Building Inspector ext. 1204; Permit Technician ext. 1205

Call before mobilizing if the project has a boundary, occupancy, fire, septic, or utility question.

Permit counter

714 Main Street, Gooding, ID 83330; mailing P.O. Box 417, Gooding, ID 83330

Operating hours

Monday-Thursday, 7:30 AM-5:30 PM

Review expectation

N/A; the county warns incomplete plans or additional required information can delay review.

Compliance workbench

Choose the next project decision.

Source trail

Official sources for this profile

Use these direct agency or licensing links to confirm current instructions before you file, pay, or schedule work. External pages control if their information differs from this directory.

Project questions

Frequently asked questions for Gooding County

Who handles permitting for this jurisdiction?

Gooding County Planning, Zoning and Building Department is the identified county-level authority for this profile. Confirm that the property is in its service area before filing.

How should I begin an application?

Begin with the online permit gateway listed in the application guide. If the portal does not recognize the address or project type, contact 208-934-5958; Building Inspector ext. 1204; Permit Technician ext. 1205.

How long might review take?

N/A; the county warns incomplete plans or additional required information can delay review.

How are inspections scheduled?

For an active permit, request inspections through the OpenGov app where the permit was obtained; appointment notifications and correspondence appear in that app. Electrical, gas, mechanical, and plumbing permits and inspections are handled by Idaho state inspectors.

Which codes and exemptions should I review?

2018 International Residential Code is identified in the current residential permit handout; the county ordinance provides for administration of the currently recognized Idaho building-code versions. Exact 2026 edition list is N/A. The county handout exempts finish work such as painting, papering, tiling, carpeting, cabinets, countertops and similar work; playground equipment; sidewalks and driveways; fences up to 7 feet; retaining walls up to 4 feet unless supporting surcharge; one-for-one window/door exchanges; roofing or re-roofing; siding; one-story detached accessory structures up to 200 sq. ft.; and detached decks up to 200 sq. ft., 30 inches or less above grade, not attached to a dwelling or serving the required exit. Structural changes still require a permit.

Before contacting the permit counter

Have the project facts ready.

A productive call starts with a clear description of the property and proposed work. Keep the site address, parcel or assessor number, project valuation, existing occupancy, approximate square footage, structural scope, contractor information, and desired start date in front of you. Those facts help the Authority Having Jurisdiction route the question to building, planning, fire, environmental health, or another reviewing discipline.

Questions worth asking

  • • Is the parcel inside an incorporated city or county service area?
  • • Does this scope require building, trade, zoning, fire, or site permits?
  • • What plans and supporting documents make the submittal complete?
  • • How much lead time is needed for each inspection?