Administrative overview · FIPS 05023
Cleburne County permit authority
The first compliance decision is jurisdictional: identify the office with statutory authority over your parcel, then use its filing and inspection sequence to keep the project moving.
Jurisdictional status
Municipal Fallback
This profile identifies a handoff outside the county’s ordinary structural permitting lane.
Required jurisdiction check
Confirm the controlling local or state authority before filing.
The record is marked Municipal Fallback. That means the county profile should be treated as a routing brief: incorporated municipalities, a state building department, or a state fire marshal may control plan review, permits, and inspections. Contact the named agency below and verify the parcel’s jurisdiction before paying a fee or scheduling field work.
Responsible agency
Cleburne County Judge’s Office for county administration; City of Heber Springs Planning & Zoning/Fire Department issues and inspects building permits within city limits. Cleburne County states that it does not require building permits outside city limits.
For a project in or near Cleburne County, this office is the identified point of contact for permit intake, statutory code enforcement, plan review coordination, and inspection release conditions. Confirm the parcel’s boundary and project type before relying on the county lane.
Direct contact
501-362-8141 (Cleburne County Judge); 501-362-8303 (Heber Springs Planning & Zoning/Building Inspector)
Call before mobilizing if the project has a boundary, occupancy, fire, septic, or utility question.
Permit counter
Cleburne County Judge’s Office, 300 West Main Street, Heber Springs, AR 72543; Heber Springs Planning & Zoning Division, Heber Springs Fire Department, 1001 W Main St, Heber Springs, AR 72543; city office address listed as 806 W Main St
Operating hours
Cleburne County Judge’s Office: county hours were not separately published on the reviewed page. Heber Springs city offices: Monday-Friday, 8:00 a.m.-4:30 p.m.; inspections are scheduled between 8:30 a.m. and 4:00 p.m.
Review expectation
N/A. Heber Springs publishes no general plan-review timeline. A permit is valid for one year while work continues to receive inspections; extensions may be authorized by the building official.
Compliance workbench
Choose the next project decision.
Apply online
Open the verified digital gateway, application form, and review timeline.
Open guide →Fees & penalties
Understand fee schedules, enforcement exposure, and stop-work liabilities.
Open guide →Codes & exemptions
Read the code framework, minor-work exemptions, and inspection lane.
Open guide →Agency website
Visit the primary public source for current notices and contact changes.
Open guide →Source trail
Official sources for this profile
Use these direct agency or licensing links to confirm current instructions before you file, pay, or schedule work. External pages control if their information differs from this directory.
Project questions
Frequently asked questions for Cleburne County
Who handles permitting for this jurisdiction?
This record is marked Municipal Fallback. Confirm whether a city, state agency, or other local authority controls the parcel before filing.
How should I begin an application?
Begin with the online permit gateway listed in the application guide. If the portal does not recognize the address or project type, contact 501-362-8141 (Cleburne County Judge); 501-362-8303 (Heber Springs Planning & Zoning/Building Inspector).
How long might review take?
N/A. Heber Springs publishes no general plan-review timeline. A permit is valid for one year while work continues to receive inspections; extensions may be authorized by the building official.
How are inspections scheduled?
Schedule Heber Springs inspections by calling 501-362-8303 or through the permit portal when the permit was obtained online. A minimum 24-hour notice is required for framing, gas/electric service, and final inspections; inspection appointments are scheduled 8:30 a.m.-4:00 p.m. The city requires permits before work begins except qualifying after-hours/weekend emergencies, which must be permitted the next business day.
Which codes and exemptions should I review?
N/A. Heber Springs requires work to meet building-code requirements but the reviewed 2026 city pages do not state a complete current code-edition list. Arkansas’s statewide framework is the 2021 Arkansas Fire Prevention Code, subject to the locally adopted municipal standards. Heber Springs requires permits for new buildings, additions, structural remodels/repairs, storm shelters, covered decks/patios, storage buildings, carports, fences, pools, demolition, cell towers, mechanical work, and plumbing/electrical work except changing fixtures. Cosmetic work such as painting, tiling, carpeting, replacing cabinets, replacing plumbing fixtures, and replacing shingles/roofing materials does not require a permit; replacing roof decking does. Replacing an existing fence with the same material also does not require a permit.