Codes, exemptions & field inspections
This guide translates the available agency record into a preconstruction checklist for structural scope, minor work, and inspection release. The adopted code and the issuing official control when a field condition is disputed.
Regulatory framework
Paulding County enforces the current Georgia State Minimum Standard Codes and adopted county building, electrical, HVAC, plumbing, and related development requirements; the reviewed county page does not enumerate a separate 2026 edition list.
Inspection lane
Call 770-505-1398 or email bldginspections@paulding.gov. Post the permit on the lot before requesting inspection; footing, framing/rough, and final inspections are required as applicable. Requests are scheduled for the next business day when possible, and re-inspection fees are $50, $100, and $200 for the first, second, and third-or-more reinspection.
Minor-work playbook
A fence no more than six feet tall does not require a permit under the county FAQ. The county's forms identify permits for accessory buildings, garages, additions, remodeling, storage buildings, swimming pools, and fences over seven feet; other minor-work exemptions should be confirmed with the division.
Field rule
A permit exemption generally addresses one narrow construction trigger. It does not automatically waive zoning, land-use, floodplain, shoreline, fire, energy, electrical, utility, septic, or right-of-way requirements. Obtain written confirmation when the project involves a new structure, structural alteration, change in occupancy, or concealed work.
Inspection pipeline
Request with lead time
Call 770-505-1398 or email bldginspections@paulding.gov. Post the permit on the lot before requesting inspection; footing, framing/rough, and final inspections are required as applicable. Requests are scheduled for the next business day when possible, and re-inspection fees are $50, $100, and $200 for the first, second, and third-or-more reinspection.
Preserve access
Do not cover framing, reinforcement, wiring, piping, damp-proofing, or life-safety work until the required inspection has been completed and documented.
Close the record
Retain the approved plans, inspection approvals, correction responses, and final certificate or occupancy release with the property file.
Contractor verification
Use the state licensing system to verify active registration, trade credentials, bond status, and liability coverage where available. Match the legal business name to the proposal and permit application.
Planning reference
A building permit is only one part of statutory compliance. Check the local zoning, ordinance, map, or land-use reference before finalizing setbacks, height, lot coverage, access, drainage, or accessory structure placement.
Open planning reference ↗Source trail
Use these direct agency or licensing links to confirm current instructions before you file, pay, or schedule work. External pages control if their information differs from this directory.
Project questions
Paulding County Community Development, Building & Permitting Division is the identified county-level authority for this profile. Confirm that the property is in its service area before filing.
No verified online portal was located in the reviewed public materials. Contact 770-443-7571 (permits); 770-505-1398 (inspections) and request the current application route before preparing a final submittal.
Building permits are issued through the office during 8:00 AM-5:00 PM; inspection requests are generally scheduled for the next business day when possible.
Call 770-505-1398 or email bldginspections@paulding.gov. Post the permit on the lot before requesting inspection; footing, framing/rough, and final inspections are required as applicable. Requests are scheduled for the next business day when possible, and re-inspection fees are $50, $100, and $200 for the first, second, and third-or-more reinspection.
Paulding County enforces the current Georgia State Minimum Standard Codes and adopted county building, electrical, HVAC, plumbing, and related development requirements; the reviewed county page does not enumerate a separate 2026 edition list. A fence no more than six feet tall does not require a permit under the county FAQ. The county's forms identify permits for accessory buildings, garages, additions, remodeling, storage buildings, swimming pools, and fences over seven feet; other minor-work exemptions should be confirmed with the division.
Field sequencing matters
Code compliance is not only a plan-review exercise. Footings, reinforcement, framing, fireblocking, wiring, piping, insulation, weather protection, and life-safety systems each have points where the work must remain accessible. Build the inspection calendar into the trade schedule instead of treating it as a final administrative step.
When a project qualifies for a narrow minor-work exemption, keep a written explanation of why it qualifies and confirm that related zoning, utility, fire, energy, or environmental rules do not create a separate approval requirement.
Closeout file
Keep the approved plan set, inspection approvals, correction responses, contractor license verification, final certificate, and any occupancy release together. A clean record protects the owner, builder, lender, insurer, and future buyer.