Digital permit application gateway
Start with the issuing authority’s own submission lane. A complete application package, accurate valuation, and accessible inspection path are the fastest route through statutory plan review.
Recommended first click
Use the official digital gateway to submit plans, monitor review comments, pay required charges, and request inspections when the permit is issued. If the link is unavailable, use the agency website or phone number on the administrative profile to confirm the current lane.
Typical review lane
The county states that 15 business days are normally required to process a complete application. It will not accept an incomplete packet, and municipal projects may need additional time for city zoning approval. No separate published permit-expiration interval was found on the county portal.
Treat this as a planning signal, not a guaranteed approval date. Completeness, corrections, resubmittals, and agency workload control the actual clock.
Verify the parcel is inside this agency’s service area and note whether a city, state, fire marshal, septic authority, or utility district also has approval authority.
Prepare legible plans, site information, project valuation, ownership authorization, contractor information, and any energy, floodplain, zoning, or utility documentation the issuing office requires.
Keep the permit number, approved plan set, correction comments, fee receipts, and inspection results together. Those records establish the compliance trail for the next trade.
Application documents
Before submission, call Building permits, inspections, and permit technician: 435-636-3260; Director of Building & Planning: 435-636-3261; Building Inspector direct listing: 435-636-3745; County Road Shop: 435-636-3268 if the project involves a change of occupancy, structural alteration, accessory structure, demolition, or work near a regulated environmental feature.
Source trail
Use these direct agency or licensing links to confirm current instructions before you file, pay, or schedule work. External pages control if their information differs from this directory.
Project questions
Carbon County Building & Planning Department is the identified county-level authority for this profile. Confirm that the property is in its service area before filing.
Begin with the online permit gateway listed in the application guide. If the portal does not recognize the address or project type, contact Building permits, inspections, and permit technician: 435-636-3260; Director of Building & Planning: 435-636-3261; Building Inspector direct listing: 435-636-3745; County Road Shop: 435-636-3268.
The county states that 15 business days are normally required to process a complete application. It will not accept an incomplete packet, and municipal projects may need additional time for city zoning approval. No separate published permit-expiration interval was found on the county portal.
Call 435-636-3260 at least 24-72 hours in advance; next-day inspections are not guaranteed when requested after 3:00 p.m. New-residential stages include footings, foundation walls and structural slabs before concrete; under-slab electrical and plumbing; shear-wall fasteners before covering; lath/flashing before stucco; four-way framing, electrical, plumbing, and mechanical; sheetrock when living space is above a garage; gas-meter and power clearances; and final before occupancy. Gas clearance requires the completed certification and a 5 psi, 10-minute test; new construction needs an Early Power Agreement before permanent power clearance.
2021 International Building Code including Appendix J; 2021 International Residential Code including Appendix Q; 2021 International Plumbing Code; 2021 International Mechanical Code; 2021 International Fuel Gas Code; and 2020 National Electrical Code. Published local criteria include 115 mph wind in exposure C, severe weathering, seismic design category C and D0 west of Helper, 24-inch frost depth generally and 36 inches in Scofield, plus site-specific ground snow load. Carbon County performs building permitting and inspection countywide; projects in East Carbon, Helper, Price, Wellington, or Scofield must first provide the applicable city's zoning approval. Published exemptions include qualifying Utah Agricultural Waiver buildings; sheds and other structures under 200 square feet; fences no higher than 7 feet; retaining walls no higher than 4 feet measured from the bottom of the footing; grade-supported water tanks up to 5,000 gallons; sidewalks and driveways; painting, papering, tiling, carpeting, cabinets, countertops, and similar finish work; prefabricated pools less than 24 inches deep; swings and playground equipment; wall-supported window awnings; and decks under 200 square feet that are under 30 inches above grade, not attached to the dwelling, and do not serve the main door. Agricultural structures must meet Utah's agricultural-use and parcel criteria; trade permits may still be required for plumbing, electrical, or mechanical work.
What makes an application complete
Before you click submit, make sure the drawings agree with the site plan, project description, valuation, ownership authorization, and contractor information. If the work changes structure, occupancy, drainage, fire protection, energy performance, or utility demand, describe that scope plainly. Ambiguous narratives create correction cycles and delay the field schedule.
Save the confirmation number, payment receipt, uploaded plan set, and every correction comment. Those records are the backbone of a defensible compliance file when multiple trades or agencies share responsibility.
Submission quality check
Site: address, parcel, access, setbacks, and existing conditions are consistent.
Scope: structural, mechanical, plumbing, electrical, fire, and energy work is identified.
Closeout: inspection contacts and the final approval path are understood before work begins.