Digital permit application gateway
Start with the issuing authority’s own submission lane. A complete application package, accurate valuation, and accessible inspection path are the fastest route through statutory plan review.
Recommended first click
Use the official digital gateway to submit plans, monitor review comments, pay required charges, and request inspections when the permit is issued. If the link is unavailable, use the agency website or phone number on the administrative profile to confirm the current lane.
Typical review lane
N/A. No typical county review timeline was published on the verified Building Inspection or Planning & Zoning pages.
Treat this as a planning signal, not a guaranteed approval date. Completeness, corrections, resubmittals, and agency workload control the actual clock.
Verify the parcel is inside this agency’s service area and note whether a city, state, fire marshal, septic authority, or utility district also has approval authority.
Prepare legible plans, site information, project valuation, ownership authorization, contractor information, and any energy, floodplain, zoning, or utility documentation the issuing office requires.
Keep the permit number, approved plan set, correction comments, fee receipts, and inspection results together. Those records establish the compliance trail for the next trade.
Application documents
Before submission, call Lincoln County Building Inspector Timothy Scott: 859-339-0739; Lincoln County Fiscal Court: 606-365-2534; Planning & Zoning: 606-365-4507; DHBC: 502-573-0395; electrical inspector Michael Leger: 859-893-4367; plumbing inspector Mark Long: 859-582-7273. if the project involves a change of occupancy, structural alteration, accessory structure, demolition, or work near a regulated environmental feature.
Source trail
Use these direct agency or licensing links to confirm current instructions before you file, pay, or schedule work. External pages control if their information differs from this directory.
Project questions
Lincoln County Building Inspection / Lincoln County Fiscal Court is the identified county-level authority for this profile. Confirm that the property is in its service area before filing.
Begin with the online permit gateway listed in the application guide. If the portal does not recognize the address or project type, contact Lincoln County Building Inspector Timothy Scott: 859-339-0739; Lincoln County Fiscal Court: 606-365-2534; Planning & Zoning: 606-365-4507; DHBC: 502-573-0395; electrical inspector Michael Leger: 859-893-4367; plumbing inspector Mark Long: 859-582-7273..
N/A. No typical county review timeline was published on the verified Building Inspection or Planning & Zoning pages.
The applicant/agent must notify the building inspector's office when inspections are needed. Published fee-covered stages are footing inspection before concrete, basement-wall steel inspection before concrete, framing inspection after electrical rough-in and before insulation/drywall, and final inspection before occupancy; a certificate of occupancy and lender letter can be issued at final. The application package must include Planning & Zoning approval, Lincoln County Health Department septic approval, occupational-tax registration, contractor liability/workers' compensation proof, a permanent 911 address, and blueprints or detailed plans.
Lincoln County's local building inspector administers the Kentucky building-permit program under the current statewide framework: 2018 Kentucky Building Code and 2018 Kentucky Residential Code, based on the 2015 IBC/IRC with Kentucky amendments. No newer 2026 KBC or KRC adoption was verified. The county page requires plan review, footing, basement-wall steel, framing and final inspections before occupancy; DHBC remains the state authority for assigned state-jurisdiction work. The county lists these no-permit exemptions: farm buildings such as barns, storage buildings, chicken houses, salt houses and sheds; detached garages without living space; unattached decks below 30 feet from finished grade; non-structural renovations or repairs; above-ground swimming pools; sidewalks; and retaining walls under 4 feet high. Applicants should confirm borderline work with the inspector, because zoning, septic, electrical and other approvals may still apply.
What makes an application complete
Before you click submit, make sure the drawings agree with the site plan, project description, valuation, ownership authorization, and contractor information. If the work changes structure, occupancy, drainage, fire protection, energy performance, or utility demand, describe that scope plainly. Ambiguous narratives create correction cycles and delay the field schedule.
Save the confirmation number, payment receipt, uploaded plan set, and every correction comment. Those records are the backbone of a defensible compliance file when multiple trades or agencies share responsibility.
Submission quality check
Site: address, parcel, access, setbacks, and existing conditions are consistent.
Scope: structural, mechanical, plumbing, electrical, fire, and energy work is identified.
Closeout: inspection contacts and the final approval path are understood before work begins.