Fees, valuation & enforcement
Permit fees are a project input. Enforcement exposure is a project risk. Use the official schedule where available, then confirm valuation, trade permits, plan review, and inspection charges with the Authority Having Jurisdiction.
Official fee pathway
The final charge may depend on declared construction value, occupancy classification, square footage, plan review, state surcharges, trade permits, technology fees, and inspection activity. Do not use a neighboring city’s fee table as a substitute for this jurisdiction.
Fee desk contact
Local building inspector Gary Boyd: 606-836-3147; Greenup County Fiscal Court/Joint Planning Commission: 606-473-6440; state building inspector Wade Trimble: 606-359-6397
Ask the counter to confirm current charges before submitting a project with multiple trades or a change of use.
Financial exposure
Plan for building, mechanical, plumbing, electrical, fire, energy, zoning, septic, right-of-way, or other reviews that the project scope triggers. The lowest initial permit fee is not always the lowest project cost.
Enforcement exposure
When work begins without authorization, the agency may halt the site, require corrective plans, impose additional fees, withhold inspection release, or require concealed work to be exposed for review.
Closeout exposure
A missing final inspection or certificate can complicate occupancy, refinancing, sale, insurance, and utility connection. Preserve the approved plans and signed inspection record through closeout.
Professional field note
Even when a cosmetic or minor project does not require a building permit, zoning, floodplain, shoreline, historic, utility, fire, or right-of-way controls may still apply. Confirm the full jurisdictional picture before work starts.
Source trail
Use these direct agency or licensing links to confirm current instructions before you file, pay, or schedule work. External pages control if their information differs from this directory.
Project questions
Greenup County Local Building Inspector and Greenup County Joint Planning Commission is the identified county-level authority for this profile. Confirm that the property is in its service area before filing.
No verified online portal was located in the reviewed public materials. Contact Local building inspector Gary Boyd: 606-836-3147; Greenup County Fiscal Court/Joint Planning Commission: 606-473-6440; state building inspector Wade Trimble: 606-359-6397 and request the current application route before preparing a final submittal.
A typical review timeline was not verified. Ask the agency for its current completeness and review estimate.
Call local building inspector Gary Boyd at 606-836-3147 to request required local inspections. For projects assigned to state jurisdiction, contact state building inspector Wade Trimble at 606-359-6397. Trade contacts in the current state directory are electrical inspector James Burt at 502-330-3513, HVAC inspector Charles Caldwell at 606-305-3409, and plumbing inspector Dewain Woolum at 606-585-5579; the plumbing office is at the Greenup County Health Department and lists Wednesday, 8:00-9:30 AM Eastern office hours.
2018 Kentucky Building Code, Fourth Edition (based on the 2015 IBC); 2018 Kentucky Residential Code, Third Edition (based on the 2015 IRC); 2015 International Mechanical Code; 2015 International Existing Building Code; 2015 International Fire Code where referenced by the KBC; 2012 IECC for commercial buildings; 2009 IECC for residential buildings; 2009 ICC/ANSI A117.1; Kentucky State Plumbing Code; 2017 NFPA 70 National Electrical Code; and referenced Kentucky/NFPA standards. The Kentucky Building Code exempts one-story detached tool/storage sheds and playhouses not over 120 square feet, fences not over 7 feet, qualifying retaining walls not over 4 feet, qualifying grade-level tanks, low sidewalks/driveways not part of an accessible route, painting, papering, tiling, carpeting, cabinets, countertops and similar finishes, small tents, nursery/agricultural shade cloth, certain residential playground equipment and wall-supported awnings, and nonfixed fixtures/counters/partitions not over 5 feet 9 inches. Exempt work must still comply with applicable codes and other laws.
Why permit costs vary
Building departments commonly calculate charges from valuation, occupancy, floor area, project type, plan review effort, trade scope, state surcharges, and inspection activity. A remodel that appears small on paper may still trigger structural, energy, fire, or utility review. Ask the permit counter which disciplines apply before you finalize the construction budget.
The same discipline applies to enforcement. Correcting unpermitted work after finishes are installed can require demolition, revised plans, additional inspections, and schedule disruption. Authorization is usually the less expensive project-management decision.