County Permit SearchU.S. compliance directory
← Greenup County overview

Codes, exemptions & field inspections

Build to the adopted code. Verify every exception.

This guide translates the available agency record into a preconstruction checklist for structural scope, minor work, and inspection release. The adopted code and the issuing official control when a field condition is disputed.

Regulatory framework

The code baseline for Greenup County.

2018 Kentucky Building Code, Fourth Edition (based on the 2015 IBC); 2018 Kentucky Residential Code, Third Edition (based on the 2015 IRC); 2015 International Mechanical Code; 2015 International Existing Building Code; 2015 International Fire Code where referenced by the KBC; 2012 IECC for commercial buildings; 2009 IECC for residential buildings; 2009 ICC/ANSI A117.1; Kentucky State Plumbing Code; 2017 NFPA 70 National Electrical Code; and referenced Kentucky/NFPA standards.

Inspection lane

Call local building inspector Gary Boyd at 606-836-3147 to request required local inspections. For projects assigned to state jurisdiction, contact state building inspector Wade Trimble at 606-359-6397. Trade contacts in the current state directory are electrical inspector James Burt at 502-330-3513, HVAC inspector Charles Caldwell at 606-305-3409, and plumbing inspector Dewain Woolum at 606-585-5579; the plumbing office is at the Greenup County Health Department and lists Wednesday, 8:00-9:30 AM Eastern office hours.

Minor-work playbook

Understand what may be exempt—and what is not.

The Kentucky Building Code exempts one-story detached tool/storage sheds and playhouses not over 120 square feet, fences not over 7 feet, qualifying retaining walls not over 4 feet, qualifying grade-level tanks, low sidewalks/driveways not part of an accessible route, painting, papering, tiling, carpeting, cabinets, countertops and similar finishes, small tents, nursery/agricultural shade cloth, certain residential playground equipment and wall-supported awnings, and nonfixed fixtures/counters/partitions not over 5 feet 9 inches. Exempt work must still comply with applicable codes and other laws.

Field rule

A permit exemption generally addresses one narrow construction trigger. It does not automatically waive zoning, land-use, floodplain, shoreline, fire, energy, electrical, utility, septic, or right-of-way requirements. Obtain written confirmation when the project involves a new structure, structural alteration, change in occupancy, or concealed work.

Inspection pipeline

Keep the work visible at every release point.

  1. 1

    Request with lead time

    Call local building inspector Gary Boyd at 606-836-3147 to request required local inspections. For projects assigned to state jurisdiction, contact state building inspector Wade Trimble at 606-359-6397. Trade contacts in the current state directory are electrical inspector James Burt at 502-330-3513, HVAC inspector Charles Caldwell at 606-305-3409, and plumbing inspector Dewain Woolum at 606-585-5579; the plumbing office is at the Greenup County Health Department and lists Wednesday, 8:00-9:30 AM Eastern office hours.

  2. 2

    Preserve access

    Do not cover framing, reinforcement, wiring, piping, damp-proofing, or life-safety work until the required inspection has been completed and documented.

  3. 3

    Close the record

    Retain the approved plans, inspection approvals, correction responses, and final certificate or occupancy release with the property file.

Contractor verification

Verify the builder before the contract is signed.

Use the state licensing system to verify active registration, trade credentials, bond status, and liability coverage where available. Match the legal business name to the proposal and permit application.

Verify contractor ↗

Planning reference

Keep the parcel rules beside the building plans.

A building permit is only one part of statutory compliance. Check the local zoning, ordinance, map, or land-use reference before finalizing setbacks, height, lot coverage, access, drainage, or accessory structure placement.

No verified planning reference link is listed; ask the agency for the parcel-specific source.

Source trail

Official sources for this profile

Use these direct agency or licensing links to confirm current instructions before you file, pay, or schedule work. External pages control if their information differs from this directory.

Agency websiteOpen official source ↗Contractor license lookupOpen official source ↗

Project questions

Frequently asked questions for Greenup County

Who handles permitting for this jurisdiction?

Greenup County Local Building Inspector and Greenup County Joint Planning Commission is the identified county-level authority for this profile. Confirm that the property is in its service area before filing.

How should I begin an application?

No verified online portal was located in the reviewed public materials. Contact Local building inspector Gary Boyd: 606-836-3147; Greenup County Fiscal Court/Joint Planning Commission: 606-473-6440; state building inspector Wade Trimble: 606-359-6397 and request the current application route before preparing a final submittal.

How long might review take?

A typical review timeline was not verified. Ask the agency for its current completeness and review estimate.

How are inspections scheduled?

Call local building inspector Gary Boyd at 606-836-3147 to request required local inspections. For projects assigned to state jurisdiction, contact state building inspector Wade Trimble at 606-359-6397. Trade contacts in the current state directory are electrical inspector James Burt at 502-330-3513, HVAC inspector Charles Caldwell at 606-305-3409, and plumbing inspector Dewain Woolum at 606-585-5579; the plumbing office is at the Greenup County Health Department and lists Wednesday, 8:00-9:30 AM Eastern office hours.

Which codes and exemptions should I review?

2018 Kentucky Building Code, Fourth Edition (based on the 2015 IBC); 2018 Kentucky Residential Code, Third Edition (based on the 2015 IRC); 2015 International Mechanical Code; 2015 International Existing Building Code; 2015 International Fire Code where referenced by the KBC; 2012 IECC for commercial buildings; 2009 IECC for residential buildings; 2009 ICC/ANSI A117.1; Kentucky State Plumbing Code; 2017 NFPA 70 National Electrical Code; and referenced Kentucky/NFPA standards. The Kentucky Building Code exempts one-story detached tool/storage sheds and playhouses not over 120 square feet, fences not over 7 feet, qualifying retaining walls not over 4 feet, qualifying grade-level tanks, low sidewalks/driveways not part of an accessible route, painting, papering, tiling, carpeting, cabinets, countertops and similar finishes, small tents, nursery/agricultural shade cloth, certain residential playground equipment and wall-supported awnings, and nonfixed fixtures/counters/partitions not over 5 feet 9 inches. Exempt work must still comply with applicable codes and other laws.

Field sequencing matters

The inspector needs to see the work at the right moment.

Code compliance is not only a plan-review exercise. Footings, reinforcement, framing, fireblocking, wiring, piping, insulation, weather protection, and life-safety systems each have points where the work must remain accessible. Build the inspection calendar into the trade schedule instead of treating it as a final administrative step.

When a project qualifies for a narrow minor-work exemption, keep a written explanation of why it qualifies and confirm that related zoning, utility, fire, energy, or environmental rules do not create a separate approval requirement.

Closeout file

Keep the approved plan set, inspection approvals, correction responses, contractor license verification, final certificate, and any occupancy release together. A clean record protects the owner, builder, lender, insurer, and future buyer.