County Permit SearchU.S. compliance directory
← Menominee County overview

Codes, exemptions & field inspections

Build to the adopted code. Verify every exception.

This guide translates the available agency record into a preconstruction checklist for structural scope, minor work, and inspection release. The adopted code and the issuing official control when a field condition is disputed.

Regulatory framework

The code baseline for Menominee County.

Town of Menominee Ordinance 63 adopts Wisconsin Administrative Code SPS 320-325 (Uniform Dwelling Code), including future revisions, for one- and two-family dwellings and their additions/alterations. Ordinance 65 adopts SPS 361-366, including future revisions, for other building construction and covers construction, HVAC, electrical and plumbing; inspectors must hold applicable SPS 305 certifications. County Ordinances 67, 68 and 71 govern general zoning, shoreland protection and floodplain zoning on lands within county jurisdiction.

Inspection lane

Call Town Building Inspector Mike Miller at 920-428-3331 to schedule required Uniform Dwelling Code/building inspections or ask inspection questions. Submit all permit materials to the Menominee County Land Conservation/Forestry/Zoning Office at W3270 Courthouse Lane or P.O. Box 279, Keshena, WI 54135; zoning questions go to 715-799-5710.

Minor-work playbook

Understand what may be exempt—and what is not.

No specific exemption summary was verified. Ask the issuing official for written confirmation before treating minor, cosmetic, or accessory work as permit-exempt.

Field rule

A permit exemption generally addresses one narrow construction trigger. It does not automatically waive zoning, land-use, floodplain, shoreline, fire, energy, electrical, utility, septic, or right-of-way requirements. Obtain written confirmation when the project involves a new structure, structural alteration, change in occupancy, or concealed work.

Inspection pipeline

Keep the work visible at every release point.

  1. 1

    Request with lead time

    Call Town Building Inspector Mike Miller at 920-428-3331 to schedule required Uniform Dwelling Code/building inspections or ask inspection questions. Submit all permit materials to the Menominee County Land Conservation/Forestry/Zoning Office at W3270 Courthouse Lane or P.O. Box 279, Keshena, WI 54135; zoning questions go to 715-799-5710.

  2. 2

    Preserve access

    Do not cover framing, reinforcement, wiring, piping, damp-proofing, or life-safety work until the required inspection has been completed and documented.

  3. 3

    Close the record

    Retain the approved plans, inspection approvals, correction responses, and final certificate or occupancy release with the property file.

Contractor verification

Verify the builder before the contract is signed.

Use the state licensing system to verify active registration, trade credentials, bond status, and liability coverage where available. Match the legal business name to the proposal and permit application.

Verify contractor ↗

Planning reference

Keep the parcel rules beside the building plans.

A building permit is only one part of statutory compliance. Check the local zoning, ordinance, map, or land-use reference before finalizing setbacks, height, lot coverage, access, drainage, or accessory structure placement.

Open planning reference ↗

Source trail

Official sources for this profile

Use these direct agency or licensing links to confirm current instructions before you file, pay, or schedule work. External pages control if their information differs from this directory.

Agency websiteOpen official source ↗Application instructionsOpen official source ↗Fee scheduleOpen official source ↗Planning or zoning referenceOpen official source ↗Contractor license lookupOpen official source ↗

Project questions

Frequently asked questions for Menominee County

Who handles permitting for this jurisdiction?

Menominee County Land Conservation/Forestry/Zoning Department, Building and Zoning is the identified county-level authority for this profile. Confirm that the property is in its service area before filing.

How should I begin an application?

No verified online portal was located in the reviewed public materials. Contact 715-799-5710; building inspector 920-428-3331 and request the current application route before preparing a final submittal.

How long might review take?

A typical review timeline was not verified. Ask the agency for its current completeness and review estimate.

How are inspections scheduled?

Call Town Building Inspector Mike Miller at 920-428-3331 to schedule required Uniform Dwelling Code/building inspections or ask inspection questions. Submit all permit materials to the Menominee County Land Conservation/Forestry/Zoning Office at W3270 Courthouse Lane or P.O. Box 279, Keshena, WI 54135; zoning questions go to 715-799-5710.

Which codes and exemptions should I review?

Town of Menominee Ordinance 63 adopts Wisconsin Administrative Code SPS 320-325 (Uniform Dwelling Code), including future revisions, for one- and two-family dwellings and their additions/alterations. Ordinance 65 adopts SPS 361-366, including future revisions, for other building construction and covers construction, HVAC, electrical and plumbing; inspectors must hold applicable SPS 305 certifications. County Ordinances 67, 68 and 71 govern general zoning, shoreland protection and floodplain zoning on lands within county jurisdiction. No specific exemption summary was verified; request written confirmation before treating work as permit-exempt.

Field sequencing matters

The inspector needs to see the work at the right moment.

Code compliance is not only a plan-review exercise. Footings, reinforcement, framing, fireblocking, wiring, piping, insulation, weather protection, and life-safety systems each have points where the work must remain accessible. Build the inspection calendar into the trade schedule instead of treating it as a final administrative step.

When a project qualifies for a narrow minor-work exemption, keep a written explanation of why it qualifies and confirm that related zoning, utility, fire, energy, or environmental rules do not create a separate approval requirement.

Closeout file

Keep the approved plan set, inspection approvals, correction responses, contractor license verification, final certificate, and any occupancy release together. A clean record protects the owner, builder, lender, insurer, and future buyer.