County Permit SearchU.S. compliance directory
← Stonewall County overview

Codes, exemptions & field inspections

Build to the adopted code. Verify every exception.

This guide translates the available agency record into a preconstruction checklist for structural scope, minor work, and inspection release. The adopted code and the issuing official control when a field condition is disputed.

Regulatory framework

The code baseline for Stonewall County.

Stonewall County Judge Ronnie Moorhead is identified by the statewide floodplain-authority directory as the county Floodplain Administrator for unincorporated flood-hazard areas. The county publishes no general building department and no adopted countywide IRC, IBC, electrical, plumbing, mechanical, or fire-code edition. Septic permitting is administered through TCEQ Region 3 under Texas Health and Safety Code Chapter 366 and 30 TAC Chapter 285. Incorporated Aspermont may impose separate municipal requirements.

Inspection lane

Contact County Judge/Floodplain Administrator Ronnie Moorhead at 940-989-3393 before development in a mapped floodplain; the county publishes no online application or inspection scheduler. For a state-administered OSSF, submit the TCEQ application, site evaluation, planning materials, and fee to Region 3, then call 325-698-9674 to arrange the required construction inspection before the system is covered or operated.

Minor-work playbook

Understand what may be exempt—and what is not.

Stonewall County publishes no general permit or exemption list for ordinary cosmetic or structural work outside regulated floodplains. State OSSF exceptions may include a qualifying system on a single-family tract of 10 acres or more, a qualifying grandfathered system, and specified emergency repairs reported to the permitting authority within 72 hours; all detailed statutory and rule conditions still apply.

Field rule

A permit exemption generally addresses one narrow construction trigger. It does not automatically waive zoning, land-use, floodplain, shoreline, fire, energy, electrical, utility, septic, or right-of-way requirements. Obtain written confirmation when the project involves a new structure, structural alteration, change in occupancy, or concealed work.

Inspection pipeline

Keep the work visible at every release point.

  1. 1

    Request with lead time

    Contact County Judge/Floodplain Administrator Ronnie Moorhead at 940-989-3393 before development in a mapped floodplain; the county publishes no online application or inspection scheduler. For a state-administered OSSF, submit the TCEQ application, site evaluation, planning materials, and fee to Region 3, then call 325-698-9674 to arrange the required construction inspection before the system is covered or operated.

  2. 2

    Preserve access

    Do not cover framing, reinforcement, wiring, piping, damp-proofing, or life-safety work until the required inspection has been completed and documented.

  3. 3

    Close the record

    Retain the approved plans, inspection approvals, correction responses, and final certificate or occupancy release with the property file.

Contractor verification

Verify the builder before the contract is signed.

Use the state licensing system to verify active registration, trade credentials, bond status, and liability coverage where available. Match the legal business name to the proposal and permit application.

Verify contractor ↗

Planning reference

Keep the parcel rules beside the building plans.

A building permit is only one part of statutory compliance. Check the local zoning, ordinance, map, or land-use reference before finalizing setbacks, height, lot coverage, access, drainage, or accessory structure placement.

Open planning reference ↗

Source trail

Official sources for this profile

Use these direct agency or licensing links to confirm current instructions before you file, pay, or schedule work. External pages control if their information differs from this directory.

Agency websiteOpen official source ↗Application instructionsOpen official source ↗Fee scheduleOpen official source ↗Planning or zoning referenceOpen official source ↗Contractor license lookupOpen official source ↗

Project questions

Frequently asked questions for Stonewall County

Who handles permitting for this jurisdiction?

Stonewall County Judge's Office (Floodplain Administrator); Texas Commission on Environmental Quality Region 3 OSSF Program is the identified county-level authority for this profile. Confirm that the property is in its service area before filing.

How should I begin an application?

No verified online portal was located in the reviewed public materials. Contact Stonewall County Judge/Floodplain Administrator: 940-989-3393; TCEQ Region 3 Abilene: 325-698-9674 and request the current application route before preparing a final submittal.

How long might review take?

No county floodplain review time was published. TCEQ must approve or deny a complete state-administered OSSF application and planning materials within 30 days.

How are inspections scheduled?

Contact County Judge/Floodplain Administrator Ronnie Moorhead at 940-989-3393 before development in a mapped floodplain; the county publishes no online application or inspection scheduler. For a state-administered OSSF, submit the TCEQ application, site evaluation, planning materials, and fee to Region 3, then call 325-698-9674 to arrange the required construction inspection before the system is covered or operated.

Which codes and exemptions should I review?

Stonewall County Judge Ronnie Moorhead is identified by the statewide floodplain-authority directory as the county Floodplain Administrator for unincorporated flood-hazard areas. The county publishes no general building department and no adopted countywide IRC, IBC, electrical, plumbing, mechanical, or fire-code edition. Septic permitting is administered through TCEQ Region 3 under Texas Health and Safety Code Chapter 366 and 30 TAC Chapter 285. Incorporated Aspermont may impose separate municipal requirements. Stonewall County publishes no general permit or exemption list for ordinary cosmetic or structural work outside regulated floodplains. State OSSF exceptions may include a qualifying system on a single-family tract of 10 acres or more, a qualifying grandfathered system, and specified emergency repairs reported to the permitting authority within 72 hours; all detailed statutory and rule conditions still apply.

Field sequencing matters

The inspector needs to see the work at the right moment.

Code compliance is not only a plan-review exercise. Footings, reinforcement, framing, fireblocking, wiring, piping, insulation, weather protection, and life-safety systems each have points where the work must remain accessible. Build the inspection calendar into the trade schedule instead of treating it as a final administrative step.

When a project qualifies for a narrow minor-work exemption, keep a written explanation of why it qualifies and confirm that related zoning, utility, fire, energy, or environmental rules do not create a separate approval requirement.

Closeout file

Keep the approved plan set, inspection approvals, correction responses, contractor license verification, final certificate, and any occupancy release together. A clean record protects the owner, builder, lender, insurer, and future buyer.