County Permit SearchU.S. compliance directory
← Nolan County overview

Codes, exemptions & field inspections

Build to the adopted code. Verify every exception.

This guide translates the available agency record into a preconstruction checklist for structural scope, minor work, and inspection release. The adopted code and the issuing official control when a field condition is disputed.

Regulatory framework

The code baseline for Nolan County.

Nolan County designates the County Judge as floodplain administrator for unincorporated areas, but the county does not publish a current flood-damage-prevention order or code edition online. Texas OSSF requirements under Health and Safety Code Chapter 366 and 30 TAC Chapter 285 are administered through TCEQ Region 3 where no authorized local agent serves the site. No general county structural building-code edition or county zoning code was published for unincorporated property in 2026.

Inspection lane

Contact County Judge and Floodplain Administrator Whitley May at 325-235-2263 before development in a mapped flood hazard area; the county publishes no online floodplain application or inspection-booking procedure. For septic work, submit current TCEQ Form 0235 with the legal description, site and soil evaluation, installer information, and planning materials to Region 3, then coordinate authorization and inspection at 325-698-9674. Do not begin construction before authorization or cover the system before required inspection.

Minor-work playbook

Understand what may be exempt—and what is not.

No county minor or cosmetic building-work exemption list was published. State OSSF permitting has a narrow exemption for one single-family residence on an undivided tract of at least 10 acres when a licensed site evaluator or professional engineer confirms the conditions, every system component is at least 100 feet from the property line, effluent remains on the tract, and the system creates no nuisance or groundwater pollution. Emergency OSSF repairs must be reported in writing within 72 hours; qualifying older, unaltered systems may remain grandfathered only while they do not create a nuisance.

Field rule

A permit exemption generally addresses one narrow construction trigger. It does not automatically waive zoning, land-use, floodplain, shoreline, fire, energy, electrical, utility, septic, or right-of-way requirements. Obtain written confirmation when the project involves a new structure, structural alteration, change in occupancy, or concealed work.

Inspection pipeline

Keep the work visible at every release point.

  1. 1

    Request with lead time

    Contact County Judge and Floodplain Administrator Whitley May at 325-235-2263 before development in a mapped flood hazard area; the county publishes no online floodplain application or inspection-booking procedure. For septic work, submit current TCEQ Form 0235 with the legal description, site and soil evaluation, installer information, and planning materials to Region 3, then coordinate authorization and inspection at 325-698-9674. Do not begin construction before authorization or cover the system before required inspection.

  2. 2

    Preserve access

    Do not cover framing, reinforcement, wiring, piping, damp-proofing, or life-safety work until the required inspection has been completed and documented.

  3. 3

    Close the record

    Retain the approved plans, inspection approvals, correction responses, and final certificate or occupancy release with the property file.

Contractor verification

Verify the builder before the contract is signed.

Use the state licensing system to verify active registration, trade credentials, bond status, and liability coverage where available. Match the legal business name to the proposal and permit application.

Verify contractor ↗

Planning reference

Keep the parcel rules beside the building plans.

A building permit is only one part of statutory compliance. Check the local zoning, ordinance, map, or land-use reference before finalizing setbacks, height, lot coverage, access, drainage, or accessory structure placement.

No verified planning reference link is listed; ask the agency for the parcel-specific source.

Source trail

Official sources for this profile

Use these direct agency or licensing links to confirm current instructions before you file, pay, or schedule work. External pages control if their information differs from this directory.

Agency websiteOpen official source ↗Permit portalOpen official source ↗Application instructionsOpen official source ↗Fee scheduleOpen official source ↗Contractor license lookupOpen official source ↗

Project questions

Frequently asked questions for Nolan County

Who handles permitting for this jurisdiction?

Nolan County Judge/Floodplain Administration; TCEQ Region 3 OSSF Program is the identified county-level authority for this profile. Confirm that the property is in its service area before filing.

How should I begin an application?

Begin with the online permit gateway listed in the application guide. If the portal does not recognize the address or project type, contact Nolan County Judge/Floodplain Administrator Whitley May: 325-235-2263; TCEQ Region 3 - Abilene: 325-698-9674; TCEQ OSSF Program: 512-239-3799.

How long might review take?

TCEQ must approve a complete OSSF application or issue a written denial within 30 days. No county floodplain or building review timeline was published.

How are inspections scheduled?

Contact County Judge and Floodplain Administrator Whitley May at 325-235-2263 before development in a mapped flood hazard area; the county publishes no online floodplain application or inspection-booking procedure. For septic work, submit current TCEQ Form 0235 with the legal description, site and soil evaluation, installer information, and planning materials to Region 3, then coordinate authorization and inspection at 325-698-9674. Do not begin construction before authorization or cover the system before required inspection.

Which codes and exemptions should I review?

Nolan County designates the County Judge as floodplain administrator for unincorporated areas, but the county does not publish a current flood-damage-prevention order or code edition online. Texas OSSF requirements under Health and Safety Code Chapter 366 and 30 TAC Chapter 285 are administered through TCEQ Region 3 where no authorized local agent serves the site. No general county structural building-code edition or county zoning code was published for unincorporated property in 2026. No county minor or cosmetic building-work exemption list was published. State OSSF permitting has a narrow exemption for one single-family residence on an undivided tract of at least 10 acres when a licensed site evaluator or professional engineer confirms the conditions, every system component is at least 100 feet from the property line, effluent remains on the tract, and the system creates no nuisance or groundwater pollution. Emergency OSSF repairs must be reported in writing within 72 hours; qualifying older, unaltered systems may remain grandfathered only while they do not create a nuisance.

Field sequencing matters

The inspector needs to see the work at the right moment.

Code compliance is not only a plan-review exercise. Footings, reinforcement, framing, fireblocking, wiring, piping, insulation, weather protection, and life-safety systems each have points where the work must remain accessible. Build the inspection calendar into the trade schedule instead of treating it as a final administrative step.

When a project qualifies for a narrow minor-work exemption, keep a written explanation of why it qualifies and confirm that related zoning, utility, fire, energy, or environmental rules do not create a separate approval requirement.

Closeout file

Keep the approved plan set, inspection approvals, correction responses, contractor license verification, final certificate, and any occupancy release together. A clean record protects the owner, builder, lender, insurer, and future buyer.