Codes, exemptions & field inspections
This guide translates the available agency record into a preconstruction checklist for structural scope, minor work, and inspection release. The adopted code and the issuing official control when a field condition is disputed.
Regulatory framework
No Donley County general building-code edition or county building-permit program was verified. State fallback OSSF requirements are Texas Health and Safety Code Chapter 366 and 30 TAC Chapter 285; the current TCEQ-0235 application is revised February 2026.
Inspection lane
Submit the TCEQ-0235 application and required site evaluation and planning materials to TCEQ Region 1 when no authorized local Donley County permitting program applies. Do not begin construction before Authorization to Construct. Contact Region 1 at 806-353-9251 or TCEQ OSSF at 512-239-3799 for inspection and submission instructions.
Minor-work playbook
An OSSF may qualify under the Texas 10-acre rule only when all state conditions are met, including a licensed site evaluation or PE report, single-family dwelling on at least 10 acres, no nuisance or groundwater pollution, 100-foot property-line setbacks, on-site effluent disposal, and only one dwelling on the tract. Defined emergency repairs may be made without a permit if reported in writing within 72 hours; grandfathered systems may qualify under state conditions.
Field rule
A permit exemption generally addresses one narrow construction trigger. It does not automatically waive zoning, land-use, floodplain, shoreline, fire, energy, electrical, utility, septic, or right-of-way requirements. Obtain written confirmation when the project involves a new structure, structural alteration, change in occupancy, or concealed work.
Inspection pipeline
Request with lead time
Submit the TCEQ-0235 application and required site evaluation and planning materials to TCEQ Region 1 when no authorized local Donley County permitting program applies. Do not begin construction before Authorization to Construct. Contact Region 1 at 806-353-9251 or TCEQ OSSF at 512-239-3799 for inspection and submission instructions.
Preserve access
Do not cover framing, reinforcement, wiring, piping, damp-proofing, or life-safety work until the required inspection has been completed and documented.
Close the record
Retain the approved plans, inspection approvals, correction responses, and final certificate or occupancy release with the property file.
Contractor verification
Use the state licensing system to verify active registration, trade credentials, bond status, and liability coverage where available. Match the legal business name to the proposal and permit application.
Planning reference
A building permit is only one part of statutory compliance. Check the local zoning, ordinance, map, or land-use reference before finalizing setbacks, height, lot coverage, access, drainage, or accessory structure placement.
No verified planning reference link is listed; ask the agency for the parcel-specific source.
Source trail
Use these direct agency or licensing links to confirm current instructions before you file, pay, or schedule work. External pages control if their information differs from this directory.
Project questions
This record is marked State Fallback. Confirm whether a city, state agency, or other local authority controls the parcel before filing.
No verified online portal was located in the reviewed public materials. Contact TCEQ Region 1 Amarillo: 806-353-9251; TCEQ OSSF Program: 512-239-3799; Donley County Judge: 806-874-3625 and request the current application route before preparing a final submittal.
The permitting authority must approve or deny a complete OSSF application and planning materials within 30 days of receipt.
Submit the TCEQ-0235 application and required site evaluation and planning materials to TCEQ Region 1 when no authorized local Donley County permitting program applies. Do not begin construction before Authorization to Construct. Contact Region 1 at 806-353-9251 or TCEQ OSSF at 512-239-3799 for inspection and submission instructions.
No Donley County general building-code edition or county building-permit program was verified. State fallback OSSF requirements are Texas Health and Safety Code Chapter 366 and 30 TAC Chapter 285; the current TCEQ-0235 application is revised February 2026. An OSSF may qualify under the Texas 10-acre rule only when all state conditions are met, including a licensed site evaluation or PE report, single-family dwelling on at least 10 acres, no nuisance or groundwater pollution, 100-foot property-line setbacks, on-site effluent disposal, and only one dwelling on the tract. Defined emergency repairs may be made without a permit if reported in writing within 72 hours; grandfathered systems may qualify under state conditions.
Field sequencing matters
Code compliance is not only a plan-review exercise. Footings, reinforcement, framing, fireblocking, wiring, piping, insulation, weather protection, and life-safety systems each have points where the work must remain accessible. Build the inspection calendar into the trade schedule instead of treating it as a final administrative step.
When a project qualifies for a narrow minor-work exemption, keep a written explanation of why it qualifies and confirm that related zoning, utility, fire, energy, or environmental rules do not create a separate approval requirement.
Closeout file
Keep the approved plan set, inspection approvals, correction responses, contractor license verification, final certificate, and any occupancy release together. A clean record protects the owner, builder, lender, insurer, and future buyer.