Digital permit application gateway
Start with the issuing authority’s own submission lane. A complete application package, accurate valuation, and accessible inspection path are the fastest route through statutory plan review.
Recommended first click
Use the official digital gateway to submit plans, monitor review comments, pay required charges, and request inspections when the permit is issued. If the link is unavailable, use the agency website or phone number on the administrative profile to confirm the current lane.
Typical review lane
The Fire Marshal must issue or deny a complete application and fee within 30 days; if neither occurs within 30 days, the construction is approved for purposes of the Fire Code. Construction must start within 180 days after issuance unless written extensions are granted.
Treat this as a planning signal, not a guaranteed approval date. Completeness, corrections, resubmittals, and agency workload control the actual clock.
Verify the parcel is inside this agency’s service area and note whether a city, state, fire marshal, septic authority, or utility district also has approval authority.
Prepare legible plans, site information, project valuation, ownership authorization, contractor information, and any energy, floodplain, zoning, or utility documentation the issuing office requires.
Keep the permit number, approved plan set, correction comments, fee receipts, and inspection results together. Those records establish the compliance trail for the next trade.
Application documents
Before submission, call 830-868-8223 (Fire Marshal); 830-868-2117 (Septic Permits); 830-868-2008 (911 Addressing) if the project involves a change of occupancy, structural alteration, accessory structure, demolition, or work near a regulated environmental feature.
Source trail
Use these direct agency or licensing links to confirm current instructions before you file, pay, or schedule work. External pages control if their information differs from this directory.
Project questions
Blanco County Fire Marshal / Septic Inspector / Commissioners Court is the identified county-level authority for this profile. Confirm that the property is in its service area before filing.
No verified online portal was located in the reviewed public materials. Contact 830-868-8223 (Fire Marshal); 830-868-2117 (Septic Permits); 830-868-2008 (911 Addressing) and request the current application route before preparing a final submittal.
The Fire Marshal must issue or deny a complete application and fee within 30 days; if neither occurs within 30 days, the construction is approved for purposes of the Fire Code. Construction must start within 180 days after issuance unless written extensions are granted.
Submit the Fire Marshal's prescribed application with two complete sets of scaled construction/site plans and the required fee. Permit holders must post the permit and street number and allow scheduled or unscheduled inspections. For final inspection, a licensed Texas engineer, registered architect, or ICC-certified building official must sign/seal the Request for Final Inspection; the Fire Marshal then conducts the final occupancy inspection and may issue a Certificate of Compliance. Contact the Septic Inspector at 830-868-2117 for septic permitting/inspection scheduling.
In unincorporated Blanco County, the Blanco County Fire Code applies to public buildings, commercial establishments, and multifamily residential dwellings with four or more units. It incorporates the 2015 International Fire Code with county amendments. County development rules govern subdivision/development review; septic permits are handled by the county Septic Inspector under applicable Texas OSSF requirements. Municipal building codes apply inside incorporated cities. The county Fire Code's scope excludes ordinary single-family dwellings and applies to public, commercial, and 4+ unit multifamily construction in unincorporated areas; incorporated cities use their own permit systems. Fire Code variances may be requested through the Board of Appeals when good cause and exceptional hardship are shown; economic hardship alone is insufficient. No broader county cosmetic-work exemption list was published.
What makes an application complete
Before you click submit, make sure the drawings agree with the site plan, project description, valuation, ownership authorization, and contractor information. If the work changes structure, occupancy, drainage, fire protection, energy performance, or utility demand, describe that scope plainly. Ambiguous narratives create correction cycles and delay the field schedule.
Save the confirmation number, payment receipt, uploaded plan set, and every correction comment. Those records are the backbone of a defensible compliance file when multiple trades or agencies share responsibility.
Submission quality check
Site: address, parcel, access, setbacks, and existing conditions are consistent.
Scope: structural, mechanical, plumbing, electrical, fire, and energy work is identified.
Closeout: inspection contacts and the final approval path are understood before work begins.