Codes, exemptions & field inspections
This guide translates the available agency record into a preconstruction checklist for structural scope, minor work, and inspection release. The adopted code and the issuing official control when a field condition is disputed.
Regulatory framework
2018 International Building, Residential, Plumbing, Mechanical, and related codes adopted by Maury County; the 2026 permit packet also requires compliance with applicable State Fire Marshal requirements and the county's zoning ordinance effective January 1, 2026.
Inspection lane
Call 931-375-3002 at least 24 hours before the inspection. The packet lists footing, foundation, dry-in/framing, plumbing, mechanical, energy, final, and blower-door inspections; beginning with the ninth inspection, reinspection fees apply.
Minor-work playbook
The 2026 packet states projects valued at $1,000 or less have no permit fee unless an inspection is required, but it does not establish a blanket permit exemption. Confirm whether a particular minor or agricultural project needs a permit with the office.
Field rule
A permit exemption generally addresses one narrow construction trigger. It does not automatically waive zoning, land-use, floodplain, shoreline, fire, energy, electrical, utility, septic, or right-of-way requirements. Obtain written confirmation when the project involves a new structure, structural alteration, change in occupancy, or concealed work.
Inspection pipeline
Request with lead time
Call 931-375-3002 at least 24 hours before the inspection. The packet lists footing, foundation, dry-in/framing, plumbing, mechanical, energy, final, and blower-door inspections; beginning with the ninth inspection, reinspection fees apply.
Preserve access
Do not cover framing, reinforcement, wiring, piping, damp-proofing, or life-safety work until the required inspection has been completed and documented.
Close the record
Retain the approved plans, inspection approvals, correction responses, and final certificate or occupancy release with the property file.
Contractor verification
Use the state licensing system to verify active registration, trade credentials, bond status, and liability coverage where available. Match the legal business name to the proposal and permit application.
Planning reference
A building permit is only one part of statutory compliance. Check the local zoning, ordinance, map, or land-use reference before finalizing setbacks, height, lot coverage, access, drainage, or accessory structure placement.
Open planning reference ↗Source trail
Use these direct agency or licensing links to confirm current instructions before you file, pay, or schedule work. External pages control if their information differs from this directory.
Project questions
Maury County Building & Zoning Office is the identified county-level authority for this profile. Confirm that the property is in its service area before filing.
Begin with the online permit gateway listed in the application guide. If the portal does not recognize the address or project type, contact 931-375-3002.
N/A; no general review timeline published.
Call 931-375-3002 at least 24 hours before the inspection. The packet lists footing, foundation, dry-in/framing, plumbing, mechanical, energy, final, and blower-door inspections; beginning with the ninth inspection, reinspection fees apply.
2018 International Building, Residential, Plumbing, Mechanical, and related codes adopted by Maury County; the 2026 permit packet also requires compliance with applicable State Fire Marshal requirements and the county's zoning ordinance effective January 1, 2026. The 2026 packet states projects valued at $1,000 or less have no permit fee unless an inspection is required, but it does not establish a blanket permit exemption. Confirm whether a particular minor or agricultural project needs a permit with the office.
Field sequencing matters
Code compliance is not only a plan-review exercise. Footings, reinforcement, framing, fireblocking, wiring, piping, insulation, weather protection, and life-safety systems each have points where the work must remain accessible. Build the inspection calendar into the trade schedule instead of treating it as a final administrative step.
When a project qualifies for a narrow minor-work exemption, keep a written explanation of why it qualifies and confirm that related zoning, utility, fire, energy, or environmental rules do not create a separate approval requirement.
Closeout file
Keep the approved plan set, inspection approvals, correction responses, contractor license verification, final certificate, and any occupancy release together. A clean record protects the owner, builder, lender, insurer, and future buyer.