Codes, exemptions & field inspections
This guide translates the available agency record into a preconstruction checklist for structural scope, minor work, and inspection release. The adopted code and the issuing official control when a field condition is disputed.
Regulatory framework
New Hampshire state baseline under RSA 155-A: 2021 IBC, IEBC, IPC, IMC, ISPSC, and IRC; 2018 IECC; 2023 NEC; and state-approved amendments. Local municipalities may administer confirmed local amendments and enforcement.
Inspection lane
Contact the building official in the city or town where the work is located. RSA 155-A assigns plan review, permitting, inspection, and occupancy functions to an authorized local enforcement agency, with a state-fire-marshal fallback on written municipal request.
Minor-work playbook
N/A at county level; the county site identifies county administration but no countywide private-building exemption list. Contact the applicable city or town for local exemptions.
Field rule
A permit exemption generally addresses one narrow construction trigger. It does not automatically waive zoning, land-use, floodplain, shoreline, fire, energy, electrical, utility, septic, or right-of-way requirements. Obtain written confirmation when the project involves a new structure, structural alteration, change in occupancy, or concealed work.
Inspection pipeline
Request with lead time
Contact the building official in the city or town where the work is located. RSA 155-A assigns plan review, permitting, inspection, and occupancy functions to an authorized local enforcement agency, with a state-fire-marshal fallback on written municipal request.
Preserve access
Do not cover framing, reinforcement, wiring, piping, damp-proofing, or life-safety work until the required inspection has been completed and documented.
Close the record
Retain the approved plans, inspection approvals, correction responses, and final certificate or occupancy release with the property file.
Contractor verification
Use the state licensing system to verify active registration, trade credentials, bond status, and liability coverage where available. Match the legal business name to the proposal and permit application.
Planning reference
A building permit is only one part of statutory compliance. Check the local zoning, ordinance, map, or land-use reference before finalizing setbacks, height, lot coverage, access, drainage, or accessory structure placement.
Open planning reference ↗Source trail
Use these direct agency or licensing links to confirm current instructions before you file, pay, or schedule work. External pages control if their information differs from this directory.
Project questions
This record is marked Municipal Fallback. Confirm whether a city, state agency, or other local authority controls the parcel before filing.
No verified online portal was located in the reviewed public materials. Contact 603-283-9415 (county administration) and request the current application route before preparing a final submittal.
N/A; municipality-specific.
Contact the building official in the city or town where the work is located. RSA 155-A assigns plan review, permitting, inspection, and occupancy functions to an authorized local enforcement agency, with a state-fire-marshal fallback on written municipal request.
New Hampshire state baseline under RSA 155-A: 2021 IBC, IEBC, IPC, IMC, ISPSC, and IRC; 2018 IECC; 2023 NEC; and state-approved amendments. Local municipalities may administer confirmed local amendments and enforcement. N/A at county level; the county site identifies county administration but no countywide private-building exemption list. Contact the applicable city or town for local exemptions.
Field sequencing matters
Code compliance is not only a plan-review exercise. Footings, reinforcement, framing, fireblocking, wiring, piping, insulation, weather protection, and life-safety systems each have points where the work must remain accessible. Build the inspection calendar into the trade schedule instead of treating it as a final administrative step.
When a project qualifies for a narrow minor-work exemption, keep a written explanation of why it qualifies and confirm that related zoning, utility, fire, energy, or environmental rules do not create a separate approval requirement.
Closeout file
Keep the approved plan set, inspection approvals, correction responses, contractor license verification, final certificate, and any occupancy release together. A clean record protects the owner, builder, lender, insurer, and future buyer.