Digital permit application gateway
Start with the issuing authority’s own submission lane. A complete application package, accurate valuation, and accessible inspection path are the fastest route through statutory plan review.
Recommended first click
Use the official digital gateway to submit plans, monitor review comments, pay required charges, and request inspections when the permit is issued. If the link is unavailable, use the agency website or phone number on the administrative profile to confirm the current lane.
Typical review lane
N/A; the county publishes a $50-per-hour plan-review rate with a one-hour minimum for commercial projects or residential projects over 3,500 square feet, but no standard review turnaround. Permits are valid for 18 months; extensions cost $50 and add six months.
Treat this as a planning signal, not a guaranteed approval date. Completeness, corrections, resubmittals, and agency workload control the actual clock.
Verify the parcel is inside this agency’s service area and note whether a city, state, fire marshal, septic authority, or utility district also has approval authority.
Prepare legible plans, site information, project valuation, ownership authorization, contractor information, and any energy, floodplain, zoning, or utility documentation the issuing office requires.
Keep the permit number, approved plan set, correction comments, fee receipts, and inspection results together. Those records establish the compliance trail for the next trade.
Application documents
Before submission, call 989-426-5931 (building, mechanical, plumbing, plan review, and clerk); 989-426-4961 (electrical inspector) if the project involves a change of occupancy, structural alteration, accessory structure, demolition, or work near a regulated environmental feature.
Source trail
Use these direct agency or licensing links to confirm current instructions before you file, pay, or schedule work. External pages control if their information differs from this directory.
Project questions
Gladwin County Construction Codes Department is the identified county-level authority for this profile. Confirm that the property is in its service area before filing.
Begin with the online permit gateway listed in the application guide. If the portal does not recognize the address or project type, contact 989-426-5931 (building, mechanical, plumbing, plan review, and clerk); 989-426-4961 (electrical inspector).
N/A; the county publishes a $50-per-hour plan-review rate with a one-hour minimum for commercial projects or residential projects over 3,500 square feet, but no standard review turnaround. Permits are valid for 18 months; extensions cost $50 and add six months.
Call the Construction Codes Department at 989-426-5931 to arrange building, mechanical, or plumbing inspections and to confirm the required permit-specific inspection sequence. The official electrical permit states that electrical inspections are performed Tuesdays and Thursdays; the plumbing permit also states inspections are available Tuesdays and Thursdays. Work must remain accessible until inspected. No standard online scheduling link or published inspection lead time was found.
Gladwin County states that it enforces Michigan state construction codes. Its current electrical permit identifies the 2015 Michigan Residential Code and 2023 National Electrical Code; Michigan's current published commercial codes are the 2021 Michigan Building, Mechanical, Plumbing, Rehabilitation, and Commercial Energy Codes, with the 2015 Michigan Residential Code remaining in effect for residential work while the 2021 residential update is enjoined. The county's zoning ordinance says no zoning permit is required for a fence unless the ordinance specifically provides otherwise; this does not waive any building or trade permit. For plan review, the plumbing application lists one- and two-family dwellings up to 3,500 square feet, minor alteration or repair work as determined by the plumbing official, buildings with fewer than 12 required plumbing fixtures, and governmental/state work under $15,000 as cases where plans are not required. Ordinary-repair and other building-permit exemptions must be confirmed with the Construction Codes Department.
What makes an application complete
Before you click submit, make sure the drawings agree with the site plan, project description, valuation, ownership authorization, and contractor information. If the work changes structure, occupancy, drainage, fire protection, energy performance, or utility demand, describe that scope plainly. Ambiguous narratives create correction cycles and delay the field schedule.
Save the confirmation number, payment receipt, uploaded plan set, and every correction comment. Those records are the backbone of a defensible compliance file when multiple trades or agencies share responsibility.
Submission quality check
Site: address, parcel, access, setbacks, and existing conditions are consistent.
Scope: structural, mechanical, plumbing, electrical, fire, and energy work is identified.
Closeout: inspection contacts and the final approval path are understood before work begins.