County Permit SearchU.S. compliance directory
← Taylor County overview

Codes, exemptions & field inspections

Build to the adopted code. Verify every exception.

This guide translates the available agency record into a preconstruction checklist for structural scope, minor work, and inspection release. The adopted code and the issuing official control when a field condition is disputed.

Regulatory framework

The code baseline for Taylor County.

Kentucky's current statewide code references include the 2018 Kentucky Building Code and 2018 Kentucky Residential Code based on the 2015 IBC/IRC, plus applicable mechanical, energy, fire, plumbing, electrical, accessibility, boiler, manufactured-housing, elevator, and NFPA requirements. Taylor County's current DHBC roster routes building-code coverage to the state building inspector; the local electrical inspectors handle listed local electrical jurisdiction.

Inspection lane

For state building jurisdiction, contact Dale Henderson at 270-849-7409 and use the Kentucky DHBC SmartGov portal. Contact the Taylor County Judge Executive/Fiscal Court at 270-465-7729 for local-authority routing. Electrical: Christopher A. Bennett at 270-378-1036 or Coy Neat at 270-469-9347; state electrical: Don Cravens at 606-391-5531. HVAC: Jason DeMurray at 270-283-1042. Plumbing: John Willis at 270-855-1447 through Taylor County Health Department office 270-465-4191 during the listed Wednesday/Friday hours. No county building-inspection scheduling portal was verified.

Minor-work playbook

Understand what may be exempt—and what is not.

No current Taylor County-specific minor or cosmetic exemption list was verified. Because the current DHBC roster does not list a local building inspector, confirm repairs, agricultural structures, accessory work, manufactured housing, and residential or commercial construction with DHBC and the Fiscal Court before beginning.

Field rule

A permit exemption generally addresses one narrow construction trigger. It does not automatically waive zoning, land-use, floodplain, shoreline, fire, energy, electrical, utility, septic, or right-of-way requirements. Obtain written confirmation when the project involves a new structure, structural alteration, change in occupancy, or concealed work.

Inspection pipeline

Keep the work visible at every release point.

  1. 1

    Request with lead time

    For state building jurisdiction, contact Dale Henderson at 270-849-7409 and use the Kentucky DHBC SmartGov portal. Contact the Taylor County Judge Executive/Fiscal Court at 270-465-7729 for local-authority routing. Electrical: Christopher A. Bennett at 270-378-1036 or Coy Neat at 270-469-9347; state electrical: Don Cravens at 606-391-5531. HVAC: Jason DeMurray at 270-283-1042. Plumbing: John Willis at 270-855-1447 through Taylor County Health Department office 270-465-4191 during the listed Wednesday/Friday hours. No county building-inspection scheduling portal was verified.

  2. 2

    Preserve access

    Do not cover framing, reinforcement, wiring, piping, damp-proofing, or life-safety work until the required inspection has been completed and documented.

  3. 3

    Close the record

    Retain the approved plans, inspection approvals, correction responses, and final certificate or occupancy release with the property file.

Contractor verification

Verify the builder before the contract is signed.

Use the state licensing system to verify active registration, trade credentials, bond status, and liability coverage where available. Match the legal business name to the proposal and permit application.

Verify contractor ↗

Planning reference

Keep the parcel rules beside the building plans.

A building permit is only one part of statutory compliance. Check the local zoning, ordinance, map, or land-use reference before finalizing setbacks, height, lot coverage, access, drainage, or accessory structure placement.

No verified planning reference link is listed; ask the agency for the parcel-specific source.

Source trail

Official sources for this profile

Use these direct agency or licensing links to confirm current instructions before you file, pay, or schedule work. External pages control if their information differs from this directory.

Agency websiteOpen official source ↗Permit portalOpen official source ↗Contractor license lookupOpen official source ↗

Project questions

Frequently asked questions for Taylor County

Who handles permitting for this jurisdiction?

This record is marked State Fallback. Confirm whether a city, state agency, or other local authority controls the parcel before filing.

How should I begin an application?

Begin with the online permit gateway listed in the application guide. If the portal does not recognize the address or project type, contact State Building Inspector Dale Henderson: 270-849-7409; Taylor County Fiscal Court/Judge Executive: 270-465-7729; State Electrical Inspector Don Cravens: 606-391-5531; Local Electrical Inspectors Christopher A. Bennett: 270-378-1036 and Coy Neat: 270-469-9347; HVAC Inspector Jason DeMurray: 270-283-1042; Plumbing Inspector John Willis: 270-855-1447; Taylor County Health Department: 270-465-4191.

How long might review take?

N/A. No current Taylor County or DHBC project-specific review timeline was published.

How are inspections scheduled?

For state building jurisdiction, contact Dale Henderson at 270-849-7409 and use the Kentucky DHBC SmartGov portal. Contact the Taylor County Judge Executive/Fiscal Court at 270-465-7729 for local-authority routing. Electrical: Christopher A. Bennett at 270-378-1036 or Coy Neat at 270-469-9347; state electrical: Don Cravens at 606-391-5531. HVAC: Jason DeMurray at 270-283-1042. Plumbing: John Willis at 270-855-1447 through Taylor County Health Department office 270-465-4191 during the listed Wednesday/Friday hours. No county building-inspection scheduling portal was verified.

Which codes and exemptions should I review?

Kentucky's current statewide code references include the 2018 Kentucky Building Code and 2018 Kentucky Residential Code based on the 2015 IBC/IRC, plus applicable mechanical, energy, fire, plumbing, electrical, accessibility, boiler, manufactured-housing, elevator, and NFPA requirements. Taylor County's current DHBC roster routes building-code coverage to the state building inspector; the local electrical inspectors handle listed local electrical jurisdiction. No current Taylor County-specific minor or cosmetic exemption list was verified. Because the current DHBC roster does not list a local building inspector, confirm repairs, agricultural structures, accessory work, manufactured housing, and residential or commercial construction with DHBC and the Fiscal Court before beginning.

Field sequencing matters

The inspector needs to see the work at the right moment.

Code compliance is not only a plan-review exercise. Footings, reinforcement, framing, fireblocking, wiring, piping, insulation, weather protection, and life-safety systems each have points where the work must remain accessible. Build the inspection calendar into the trade schedule instead of treating it as a final administrative step.

When a project qualifies for a narrow minor-work exemption, keep a written explanation of why it qualifies and confirm that related zoning, utility, fire, energy, or environmental rules do not create a separate approval requirement.

Closeout file

Keep the approved plan set, inspection approvals, correction responses, contractor license verification, final certificate, and any occupancy release together. A clean record protects the owner, builder, lender, insurer, and future buyer.