County Permit SearchU.S. compliance directory
← Marshall County overview

Codes, exemptions & field inspections

Build to the adopted code. Verify every exception.

This guide translates the available agency record into a preconstruction checklist for structural scope, minor work, and inspection release. The adopted code and the issuing official control when a field condition is disputed.

Regulatory framework

The code baseline for Marshall County.

The current Marshall County Building Office states that it enforces the Kentucky Building Code and Kentucky Residential Code for all construction in Benton, Calvert City, Hardin, and the county. An older county guide listed the 2013 Kentucky Building Code, 2013 Kentucky Residential Code, 2014 NFPA 70/National Electrical Code, 2009 International Energy Conservation Code, Kentucky plumbing rules, and NFIP; no county-specific 2026 edition or amendment notice was verified.

Inspection lane

The Building Office performs plan reviews and inspections during construction. Contact the office at 270-527-4744 to arrange inspections or a meeting. Current listed staff include Building Official Casey Counce and Building Inspector Randy Duke; electrical inspectors Greg Hobgood (270-559-7017) and David Waggoner (270-519-0289), and plumbing inspector Danny Neal (270-493-9931) are listed in the county directory.

Minor-work playbook

Understand what may be exempt—and what is not.

The current county page states that building permits are required for all construction, commercial and residential, within Marshall County. No current minor or cosmetic exemption list was published; confirm any narrow state-code exemption with the Building Office before work.

Field rule

A permit exemption generally addresses one narrow construction trigger. It does not automatically waive zoning, land-use, floodplain, shoreline, fire, energy, electrical, utility, septic, or right-of-way requirements. Obtain written confirmation when the project involves a new structure, structural alteration, change in occupancy, or concealed work.

Inspection pipeline

Keep the work visible at every release point.

  1. 1

    Request with lead time

    The Building Office performs plan reviews and inspections during construction. Contact the office at 270-527-4744 to arrange inspections or a meeting. Current listed staff include Building Official Casey Counce and Building Inspector Randy Duke; electrical inspectors Greg Hobgood (270-559-7017) and David Waggoner (270-519-0289), and plumbing inspector Danny Neal (270-493-9931) are listed in the county directory.

  2. 2

    Preserve access

    Do not cover framing, reinforcement, wiring, piping, damp-proofing, or life-safety work until the required inspection has been completed and documented.

  3. 3

    Close the record

    Retain the approved plans, inspection approvals, correction responses, and final certificate or occupancy release with the property file.

Contractor verification

Verify the builder before the contract is signed.

Use the state licensing system to verify active registration, trade credentials, bond status, and liability coverage where available. Match the legal business name to the proposal and permit application.

Verify contractor ↗

Planning reference

Keep the parcel rules beside the building plans.

A building permit is only one part of statutory compliance. Check the local zoning, ordinance, map, or land-use reference before finalizing setbacks, height, lot coverage, access, drainage, or accessory structure placement.

Open planning reference ↗

Source trail

Official sources for this profile

Use these direct agency or licensing links to confirm current instructions before you file, pay, or schedule work. External pages control if their information differs from this directory.

Agency websiteOpen official source ↗Planning or zoning referenceOpen official source ↗Contractor license lookupOpen official source ↗

Project questions

Frequently asked questions for Marshall County

Who handles permitting for this jurisdiction?

Marshall County Building Office / Marshall County Fiscal Court is the identified county-level authority for this profile. Confirm that the property is in its service area before filing.

How should I begin an application?

Begin with the online permit gateway listed in the application guide. If the portal does not recognize the address or project type, contact Marshall County Building Office: 270-527-4744; Marshall County Fiscal Court: 270-527-4740; Building Official Casey Counce: 270-527-4744; Building Inspector Randy Duke: contact through the Building Office..

How long might review take?

N/A. No current county plan-review turnaround time was published.

How are inspections scheduled?

The Building Office performs plan reviews and inspections during construction. Contact the office at 270-527-4744 to arrange inspections or a meeting. Current listed staff include Building Official Casey Counce and Building Inspector Randy Duke; electrical inspectors Greg Hobgood (270-559-7017) and David Waggoner (270-519-0289), and plumbing inspector Danny Neal (270-493-9931) are listed in the county directory.

Which codes and exemptions should I review?

The current Marshall County Building Office states that it enforces the Kentucky Building Code and Kentucky Residential Code for all construction in Benton, Calvert City, Hardin, and the county. An older county guide listed the 2013 Kentucky Building Code, 2013 Kentucky Residential Code, 2014 NFPA 70/National Electrical Code, 2009 International Energy Conservation Code, Kentucky plumbing rules, and NFIP; no county-specific 2026 edition or amendment notice was verified. The current county page states that building permits are required for all construction, commercial and residential, within Marshall County. No current minor or cosmetic exemption list was published; confirm any narrow state-code exemption with the Building Office before work.

Field sequencing matters

The inspector needs to see the work at the right moment.

Code compliance is not only a plan-review exercise. Footings, reinforcement, framing, fireblocking, wiring, piping, insulation, weather protection, and life-safety systems each have points where the work must remain accessible. Build the inspection calendar into the trade schedule instead of treating it as a final administrative step.

When a project qualifies for a narrow minor-work exemption, keep a written explanation of why it qualifies and confirm that related zoning, utility, fire, energy, or environmental rules do not create a separate approval requirement.

Closeout file

Keep the approved plan set, inspection approvals, correction responses, contractor license verification, final certificate, and any occupancy release together. A clean record protects the owner, builder, lender, insurer, and future buyer.