County Permit SearchU.S. compliance directory
← Laurel County overview

Codes, exemptions & field inspections

Build to the adopted code. Verify every exception.

This guide translates the available agency record into a preconstruction checklist for structural scope, minor work, and inspection release. The adopted code and the issuing official control when a field condition is disputed.

Regulatory framework

The code baseline for Laurel County.

The current local building page directs projects to the City of London Building Division, and the current DHBC county assignment lists London’s local building inspector with Dillon Fields as state building inspector. Kentucky’s current statewide framework is the 2018 Kentucky Building Code and 2018 Kentucky Residential Code, based on the 2015 IBC/IRC with Kentucky amendments. No newer 2026 KBC or KRC adoption was verified.

Inspection lane

Contact Josh Wilson at 606-864-8401 or Dan Pruett at 606-224-5808 during 8:00 a.m.-4:00 p.m. for London building inspections. The application requires the owner or contractor to notify the Building Inspector when a new or altered structure or new use is ready for final inspection; sidewalks, decks, porches, parking, and grading must be complete, and electrical, plumbing, and HVAC approval certificates must be submitted before a certificate of occupancy. State building inspector Dillon Fields is 606-312-9428; state manufactured-housing inspector Mark Pruitt is 606-224-7464; state electrical inspector Anisa Ross is 606-278-4383; elevator Benjamin Pennington is 502-234-8725; HVAC Joey Pratt is 606-671-7130; plumbing Mike Doolin is 606-622-7666 or 606-862-1297 at Laurel County Health Department, 525 Whitley Street, London, Monday/Wednesday/Friday 8:00-9:30 a.m.; and boiler David Miller is 606-594-8146.

Minor-work playbook

Understand what may be exempt—and what is not.

The City of London’s current building page identifies vinyl siding, replacement windows, painting, and shingle replacement as examples that do not require permitting. New construction, additions, or moving a structure over 120 square feet; changing a building’s use; or affecting a load-bearing wall requires advance contact with DHBC/building officials. Confirm whether a project is inside London city limits and whether zoning, trade, floodplain, or health approvals are separately required.

Field rule

A permit exemption generally addresses one narrow construction trigger. It does not automatically waive zoning, land-use, floodplain, shoreline, fire, energy, electrical, utility, septic, or right-of-way requirements. Obtain written confirmation when the project involves a new structure, structural alteration, change in occupancy, or concealed work.

Inspection pipeline

Keep the work visible at every release point.

  1. 1

    Request with lead time

    Contact Josh Wilson at 606-864-8401 or Dan Pruett at 606-224-5808 during 8:00 a.m.-4:00 p.m. for London building inspections. The application requires the owner or contractor to notify the Building Inspector when a new or altered structure or new use is ready for final inspection; sidewalks, decks, porches, parking, and grading must be complete, and electrical, plumbing, and HVAC approval certificates must be submitted before a certificate of occupancy. State building inspector Dillon Fields is 606-312-9428; state manufactured-housing inspector Mark Pruitt is 606-224-7464; state electrical inspector Anisa Ross is 606-278-4383; elevator Benjamin Pennington is 502-234-8725; HVAC Joey Pratt is 606-671-7130; plumbing Mike Doolin is 606-622-7666 or 606-862-1297 at Laurel County Health Department, 525 Whitley Street, London, Monday/Wednesday/Friday 8:00-9:30 a.m.; and boiler David Miller is 606-594-8146.

  2. 2

    Preserve access

    Do not cover framing, reinforcement, wiring, piping, damp-proofing, or life-safety work until the required inspection has been completed and documented.

  3. 3

    Close the record

    Retain the approved plans, inspection approvals, correction responses, and final certificate or occupancy release with the property file.

Contractor verification

Verify the builder before the contract is signed.

Use the state licensing system to verify active registration, trade credentials, bond status, and liability coverage where available. Match the legal business name to the proposal and permit application.

Verify contractor ↗

Planning reference

Keep the parcel rules beside the building plans.

A building permit is only one part of statutory compliance. Check the local zoning, ordinance, map, or land-use reference before finalizing setbacks, height, lot coverage, access, drainage, or accessory structure placement.

Open planning reference ↗

Source trail

Official sources for this profile

Use these direct agency or licensing links to confirm current instructions before you file, pay, or schedule work. External pages control if their information differs from this directory.

Project questions

Frequently asked questions for Laurel County

Who handles permitting for this jurisdiction?

This record is marked Municipal Fallback. Confirm whether a city, state agency, or other local authority controls the parcel before filing.

How should I begin an application?

Begin with the online permit gateway listed in the application guide. If the portal does not recognize the address or project type, contact City of London Building Inspector Josh Wilson: 606-864-8401; Assistant Building Inspector Dan Pruett: 606-224-5808; London City Hall: 606-864-4169; state building inspector Dillon Fields: 606-312-9428; Laurel County Fiscal Court: 606-864-4640..

How long might review take?

N/A. No current London or Laurel County building-permit review timeline was published on the verified official pages.

How are inspections scheduled?

Contact Josh Wilson at 606-864-8401 or Dan Pruett at 606-224-5808 during 8:00 a.m.-4:00 p.m. for London building inspections. The application requires the owner or contractor to notify the Building Inspector when a new or altered structure or new use is ready for final inspection; sidewalks, decks, porches, parking, and grading must be complete, and electrical, plumbing, and HVAC approval certificates must be submitted before a certificate of occupancy. State building inspector Dillon Fields is 606-312-9428; state manufactured-housing inspector Mark Pruitt is 606-224-7464; state electrical inspector Anisa Ross is 606-278-4383; elevator Benjamin Pennington is 502-234-8725; HVAC Joey Pratt is 606-671-7130; plumbing Mike Doolin is 606-622-7666 or 606-862-1297 at Laurel County Health Department, 525 Whitley Street, London, Monday/Wednesday/Friday 8:00-9:30 a.m.; and boiler David Miller is 606-594-8146.

Which codes and exemptions should I review?

The current local building page directs projects to the City of London Building Division, and the current DHBC county assignment lists London’s local building inspector with Dillon Fields as state building inspector. Kentucky’s current statewide framework is the 2018 Kentucky Building Code and 2018 Kentucky Residential Code, based on the 2015 IBC/IRC with Kentucky amendments. No newer 2026 KBC or KRC adoption was verified. The City of London’s current building page identifies vinyl siding, replacement windows, painting, and shingle replacement as examples that do not require permitting. New construction, additions, or moving a structure over 120 square feet; changing a building’s use; or affecting a load-bearing wall requires advance contact with DHBC/building officials. Confirm whether a project is inside London city limits and whether zoning, trade, floodplain, or health approvals are separately required.

Field sequencing matters

The inspector needs to see the work at the right moment.

Code compliance is not only a plan-review exercise. Footings, reinforcement, framing, fireblocking, wiring, piping, insulation, weather protection, and life-safety systems each have points where the work must remain accessible. Build the inspection calendar into the trade schedule instead of treating it as a final administrative step.

When a project qualifies for a narrow minor-work exemption, keep a written explanation of why it qualifies and confirm that related zoning, utility, fire, energy, or environmental rules do not create a separate approval requirement.

Closeout file

Keep the approved plan set, inspection approvals, correction responses, contractor license verification, final certificate, and any occupancy release together. A clean record protects the owner, builder, lender, insurer, and future buyer.