Digital permit application gateway
Start with the issuing authority’s own submission lane. A complete application package, accurate valuation, and accessible inspection path are the fastest route through statutory plan review.
Recommended first click
Use the official digital gateway to submit plans, monitor review comments, pay required charges, and request inspections when the permit is issued. If the link is unavailable, use the agency website or phone number on the administrative profile to confirm the current lane.
Typical review lane
Ask the agency for its current review estimate
Treat this as a planning signal, not a guaranteed approval date. Completeness, corrections, resubmittals, and agency workload control the actual clock.
Verify the parcel is inside this agency’s service area and note whether a city, state, fire marshal, septic authority, or utility district also has approval authority.
Prepare legible plans, site information, project valuation, ownership authorization, contractor information, and any energy, floodplain, zoning, or utility documentation the issuing office requires.
Keep the permit number, approved plan set, correction comments, fee receipts, and inspection results together. Those records establish the compliance trail for the next trade.
Application documents
Before submission, call Building Code Enforcement: 502-573-0373; state building inspector Joe Parson: 606-748-2384 if the project involves a change of occupancy, structural alteration, accessory structure, demolition, or work near a regulated environmental feature.
Source trail
Use these direct agency or licensing links to confirm current instructions before you file, pay, or schedule work. External pages control if their information differs from this directory.
Project questions
This record is marked State Fallback. Confirm whether a city, state agency, or other local authority controls the parcel before filing.
Begin with the online permit gateway listed in the application guide. If the portal does not recognize the address or project type, contact Building Code Enforcement: 502-573-0373; state building inspector Joe Parson: 606-748-2384.
A typical review timeline was not verified. Ask the agency for its current completeness and review estimate.
For state-jurisdiction commercial work, contact state building inspector Joe Parson at 606-748-2384 or Building Code Enforcement at 502-573-0373 and use the SmartGov case portal. The owner or agent must request the final inspection when construction is complete; the building official sets the time and notifies the requester. In the absence of an Elliott County residential inspection program, one-family work receives only the separately required mechanical-system inspection by Kentucky HVAC and electrical inspection through the local/state-certified electrical inspector.
2018 Kentucky Building Code, Fourth Edition (based on the 2015 IBC); 2018 Kentucky Residential Code, Third Edition (based on the 2015 IRC); 2015 International Mechanical Code; 2015 International Existing Building Code; 2015 International Fire Code where referenced by the KBC; 2012 IECC for commercial buildings; 2009 IECC for residential buildings; 2009 ICC/ANSI A117.1; Kentucky State Plumbing Code; 2017 NFPA 70 National Electrical Code; and referenced Kentucky/NFPA standards. Under the Kentucky Building Code, permit-exempt work includes one-story detached tool/storage sheds and playhouses not over 120 square feet, fences not over 7 feet, qualifying retaining walls not over 4 feet, qualifying grade-level tanks, low sidewalks/driveways not part of an accessible route, painting, papering, tiling, carpeting, cabinets, countertops and similar finishes, small tents, nursery/agricultural shade cloth, certain residential playground equipment and wall-supported awnings, and nonfixed fixtures/counters/partitions not over 5 feet 9 inches. Elliott County has no local single-family inspection program: dwellings must comply with the Kentucky Residential Code, but there is no general residential building permit/inspection by the state fallback; HVAC and electrical permitting/inspection still apply.
What makes an application complete
Before you click submit, make sure the drawings agree with the site plan, project description, valuation, ownership authorization, and contractor information. If the work changes structure, occupancy, drainage, fire protection, energy performance, or utility demand, describe that scope plainly. Ambiguous narratives create correction cycles and delay the field schedule.
Save the confirmation number, payment receipt, uploaded plan set, and every correction comment. Those records are the backbone of a defensible compliance file when multiple trades or agencies share responsibility.
Submission quality check
Site: address, parcel, access, setbacks, and existing conditions are consistent.
Scope: structural, mechanical, plumbing, electrical, fire, and energy work is identified.
Closeout: inspection contacts and the final approval path are understood before work begins.