Digital permit application gateway
Start with the issuing authority’s own submission lane. A complete application package, accurate valuation, and accessible inspection path are the fastest route through statutory plan review.
Recommended first click
Use the official digital gateway to submit plans, monitor review comments, pay required charges, and request inspections when the permit is issued. If the link is unavailable, use the agency website or phone number on the administrative profile to confirm the current lane.
Typical review lane
N/A. No published building-plan review timeline was found.
Treat this as a planning signal, not a guaranteed approval date. Completeness, corrections, resubmittals, and agency workload control the actual clock.
Verify the parcel is inside this agency’s service area and note whether a city, state, fire marshal, septic authority, or utility district also has approval authority.
Prepare legible plans, site information, project valuation, ownership authorization, contractor information, and any energy, floodplain, zoning, or utility documentation the issuing office requires.
Keep the permit number, approved plan set, correction comments, fee receipts, and inspection results together. Those records establish the compliance trail for the next trade.
Application documents
Before submission, call 606-424-6943 if the project involves a change of occupancy, structural alteration, accessory structure, demolition, or work near a regulated environmental feature.
Source trail
Use these direct agency or licensing links to confirm current instructions before you file, pay, or schedule work. External pages control if their information differs from this directory.
Project questions
This record is marked State Fallback. Confirm whether a city, state agency, or other local authority controls the parcel before filing.
Begin with the online permit gateway listed in the application guide. If the portal does not recognize the address or project type, contact 606-424-6943.
N/A. No published building-plan review timeline was found.
For commercial building permits/new buildings/remodeling, contact Ron Hampton or State Building Inspector Ronald Hamilton at 606-424-6943. Local building inspector Michael Miller is listed through the City of Ashland at 606-327-2047. Plumbing permits/inspections use 606-324-6530; HVAC inspector Richard Gulley is 606-748-9008; electrical inspection arrangements are through the applicable utility/licensed inspector. Ground disturbance requires a stormwater permit under Boyd County Ordinance 05-0; code-enforcement office is 606-928-1285.
Commercial building permits and inspections are handled through the Kentucky Department of Housing, Buildings and Construction/state building inspector; the county page lists Ronald Hamilton at 606-424-6943. The statewide framework is the 2018 Kentucky Building Code and 2018 Kentucky Residential Code, based on the 2015 IBC/IRC with Kentucky amendments. No newer 2026 code adoption was verified. Boyd County’s official construction page explicitly marks building permits for residential construction and remodeling as ‘Non Required.’ Commercial new construction and remodeling require coordination with the state building inspector. Separate stormwater/site-development, floodplain, encroachment, plumbing, HVAC, electrical, and manufactured-housing requirements may still apply depending on the work.
What makes an application complete
Before you click submit, make sure the drawings agree with the site plan, project description, valuation, ownership authorization, and contractor information. If the work changes structure, occupancy, drainage, fire protection, energy performance, or utility demand, describe that scope plainly. Ambiguous narratives create correction cycles and delay the field schedule.
Save the confirmation number, payment receipt, uploaded plan set, and every correction comment. Those records are the backbone of a defensible compliance file when multiple trades or agencies share responsibility.
Submission quality check
Site: address, parcel, access, setbacks, and existing conditions are consistent.
Scope: structural, mechanical, plumbing, electrical, fire, and energy work is identified.
Closeout: inspection contacts and the final approval path are understood before work begins.