Digital permit application gateway
Start with the issuing authority’s own submission lane. A complete application package, accurate valuation, and accessible inspection path are the fastest route through statutory plan review.
Recommended first click
Use the official digital gateway to submit plans, monitor review comments, pay required charges, and request inspections when the permit is issued. If the link is unavailable, use the agency website or phone number on the administrative profile to confirm the current lane.
Typical review lane
N/A. No Adair County plan-review or inspection turnaround time was published. State DHBC advises contacting the office to determine the applicable plan-review and inspection jurisdiction.
Treat this as a planning signal, not a guaranteed approval date. Completeness, corrections, resubmittals, and agency workload control the actual clock.
Verify the parcel is inside this agency’s service area and note whether a city, state, fire marshal, septic authority, or utility district also has approval authority.
Prepare legible plans, site information, project valuation, ownership authorization, contractor information, and any energy, floodplain, zoning, or utility documentation the issuing office requires.
Keep the permit number, approved plan set, correction comments, fee receipts, and inspection results together. Those records establish the compliance trail for the next trade.
Application documents
Before submission, call Kenny Blevins, Local Building Inspector: 606-706-5140; Adair County Judge Executive's Office: 270-384-4703 if the project involves a change of occupancy, structural alteration, accessory structure, demolition, or work near a regulated environmental feature.
Source trail
Use these direct agency or licensing links to confirm current instructions before you file, pay, or schedule work. External pages control if their information differs from this directory.
Project questions
Adair County Local Building Inspector / Kentucky Department of Housing, Buildings and Construction is the identified county-level authority for this profile. Confirm that the property is in its service area before filing.
Begin with the online permit gateway listed in the application guide. If the portal does not recognize the address or project type, contact Kenny Blevins, Local Building Inspector: 606-706-5140; Adair County Judge Executive's Office: 270-384-4703.
N/A. No Adair County plan-review or inspection turnaround time was published. State DHBC advises contacting the office to determine the applicable plan-review and inspection jurisdiction.
Contact local building inspector Kenny Blevins at 606-706-5140 to apply and schedule building inspections. The official Kentucky inspector sheet separately lists State Building Inspector Barry Jones at 270-566-9252, local electrical inspection through the County Judge Executive's office or the city where work occurs, HVAC Inspector Brenton Clemons at 270-349-2473, and Plumbing Inspector John Willis at 270-855-1447. State plan-review questions may be directed to DHBC at 502-573-0373.
Kentucky's official Department of Housing, Buildings and Construction states that the 2018 Kentucky Building Code, Second Edition and 2018 Kentucky Residential Code, Second Edition were adopted August 3, 2019. They are based on the 2015 International Building Code and 2015 International Residential Code for one- and two-family dwellings, with Kentucky amendments; electrical work follows NFPA 70 as adopted by Kentucky. No newer 2026 code adoption was verified. Under the official Kentucky code materials used by local jurisdictions, permits are generally not required for one-story detached tool/storage sheds or playhouses up to 200 square feet; fences up to 7 feet high; retaining walls up to 4 feet high; qualifying ground-supported water tanks up to 5,000 gallons; sidewalks and driveways; painting, papering, tiling, carpeting, cabinets, countertops, and similar finish work; swings/playground equipment; qualifying exterior window awnings; and qualifying detached decks up to 200 square feet, no more than 30 inches above grade, not attached to a dwelling, and not serving a required exit. Minor electrical repairs and certain low-voltage or temporary systems are also exempt. Exempt work must still comply with other laws and may require zoning or trade approvals.
What makes an application complete
Before you click submit, make sure the drawings agree with the site plan, project description, valuation, ownership authorization, and contractor information. If the work changes structure, occupancy, drainage, fire protection, energy performance, or utility demand, describe that scope plainly. Ambiguous narratives create correction cycles and delay the field schedule.
Save the confirmation number, payment receipt, uploaded plan set, and every correction comment. Those records are the backbone of a defensible compliance file when multiple trades or agencies share responsibility.
Submission quality check
Site: address, parcel, access, setbacks, and existing conditions are consistent.
Scope: structural, mechanical, plumbing, electrical, fire, and energy work is identified.
Closeout: inspection contacts and the final approval path are understood before work begins.