Digital permit application gateway
Start with the issuing authority’s own submission lane. A complete application package, accurate valuation, and accessible inspection path are the fastest route through statutory plan review.
Recommended first click
Use the official digital gateway to submit plans, monitor review comments, pay required charges, and request inspections when the permit is issued. If the link is unavailable, use the agency website or phone number on the administrative profile to confirm the current lane.
Typical review lane
The code requires applications to be examined within a reasonable time and permits issued as soon as practicable when compliant. Applications are abandoned after 180 days unless pursued in good faith or extended. The Unified Government's published development guidance states that coordinated land-bank approvals may take one to two months; no general building-plan review deadline was published.
Treat this as a planning signal, not a guaranteed approval date. Completeness, corrections, resubmittals, and agency workload control the actual clock.
Verify the parcel is inside this agency’s service area and note whether a city, state, fire marshal, septic authority, or utility district also has approval authority.
Prepare legible plans, site information, project valuation, ownership authorization, contractor information, and any energy, floodplain, zoning, or utility documentation the issuing office requires.
Keep the permit number, approved plan set, correction comments, fee receipts, and inspection results together. Those records establish the compliance trail for the next trade.
Application documents
Before submission, call 913-573-8620 (Building Inspection); 913-573-5750 (Planning and Zoning) if the project involves a change of occupancy, structural alteration, accessory structure, demolition, or work near a regulated environmental feature.
Source trail
Use these direct agency or licensing links to confirm current instructions before you file, pay, or schedule work. External pages control if their information differs from this directory.
Project questions
Unified Government of Wyandotte County/Kansas City, Kansas Building Inspection Division is the identified county-level authority for this profile. Confirm that the property is in its service area before filing.
Begin with the online permit gateway listed in the application guide. If the portal does not recognize the address or project type, contact 913-573-8620 (Building Inspection); 913-573-5750 (Planning and Zoning).
The code requires applications to be examined within a reasonable time and permits issued as soon as practicable when compliant. Applications are abandoned after 180 days unless pursued in good faith or extended. The Unified Government's published development guidance states that coordinated land-bank approvals may take one to two months; no general building-plan review deadline was published.
Required work remains accessible and exposed until approved. The permit holder must request final inspection and apply for a certificate of occupancy when required. Use the official Accela Citizen Access portal at https://aca-prod.accela.com/UG for permit and inspection records/scheduling where available, or contact Building Inspection at 913-573-8620. The official application also lists Planning and Zoning at 913-573-5750, Health at 913-321-4803, Public Works at 913-573-5400, and Fire Prevention at 913-573-5550 for coordinated reviews.
The Unified Government Building Code adopts the 2018 International Building Code, including referenced standards and specified appendices C, H, and J, with Unified Government amendments. The code regulates building, electrical, gas, mechanical, plumbing, elevator, occupancy, inspection, and related work. No newer 2026 technical-code adoption was verified in the official materials reviewed. The code exempts retaining walls not over 4 feet high unless supporting a surcharge or impounding specified liquids; reroofing existing buildings when structural elements are not repaired or replaced; detached open pergolas or similar structures associated with one- or two-family dwellings up to 400 square feet; sidewalks, driveways, decks, and platforms no more than 30 inches above grade when not over a basement/story and not part of an accessible route; minor electrical repairs and portable-equipment connections; portable heating appliances; minor gas-part replacements and less than 6 feet of gas-piping work; emergency repairs if the application is filed by the next working day; ordinary repairs that do not affect structural supports, egress, or regulated plumbing/electrical/mechanical systems; and utility equipment owned and controlled by public service agencies. Exempt work must still comply with other laws and ordinances.
What makes an application complete
Before you click submit, make sure the drawings agree with the site plan, project description, valuation, ownership authorization, and contractor information. If the work changes structure, occupancy, drainage, fire protection, energy performance, or utility demand, describe that scope plainly. Ambiguous narratives create correction cycles and delay the field schedule.
Save the confirmation number, payment receipt, uploaded plan set, and every correction comment. Those records are the backbone of a defensible compliance file when multiple trades or agencies share responsibility.
Submission quality check
Site: address, parcel, access, setbacks, and existing conditions are consistent.
Scope: structural, mechanical, plumbing, electrical, fire, and energy work is identified.
Closeout: inspection contacts and the final approval path are understood before work begins.